Bitvise SSH Server

helium

Bardzo aktywny
Ekspert
Dołączył
16 Czerwiec 2010
Posty
2015
Reakcje/Polubienia
2315
Miasto
Kraków


Bitvise SSH Server




Serwer SSH umożliwia bezpieczne zdalne logowanie do stacji roboczych i serwerów Windows. Bezpieczeństwo to kluczowa cecha serwera SSH: w przeciwieństwie do serwerów Telnet i FTP, Bitvise SSH Server szyfruje dane podczas transmisji. Dzięki temu nikt nie może poznać Twojego hasła ani zobaczyć, jakie pliki przesyłasz, gdy masz dostęp do komputera przez SSH.

Bitvise SSH Server w wersji Personal może być używany tylko przez rzeczywistych, niekomercyjnych użytkowników osobistych, którzy nie używają serwera SSH jako części przedsięwzięcia komercyjnego i nie używają go w organizacji, komercyjnej lub innej. Wszelkie zastosowania komercyjne lub organizacyjne wymagają zakupionej licencji.

Testuję ten serwer od kilku dni i muszę stwierdzić, że to kawał bardzo dobrego programu :)
Do użytku domowego (za darmo) jest nawet więcej niż potrzeba, no chyba że ktoś ma familię większą i potrzeba więcej niż 10 kont.


Ograniczenia wersji Personal Edition
  • On domain member computers, can use only local Windows accounts. On a domain controller, can use domain accounts of that domain controller.
  • Can configure only one Windows group (Everyone).
  • Can configure only one virtual group.
  • Has a limit of 10 Windows account entries.
  • Has a limit of 10 virtual account entries.
  • GSSAPI authentication is disabled (Kerberos and NTLM).

Changes in Bitvise SSH Server 8.49: [ 14 September 2021 ]

  • Version information:
    • The SSH Server's upgrade access amnesty continues, so that all users of previous 8.xx version can update to the latest version with accumulated fixes. The minimum upgrade access to use this version is October 23, 2018.
      We are at this point highly confident in the security, stability and compatibility of our latest 8.xx versions. We are aware of users still relying on versions 7.xx and 6.xx, and sometimes even older. The SSH Server is security-sensitive, network-facing software, and updating is the only way to receive the latest security and reliability fixes. We suggest all users update.
  • Control Panel and settings:
    • In Easy settings, when a mount point type was set to Blind drop, it could not subsequently be changed back to Limit to root directory. It was instead necessary to use Advanced settings to reset mount point permissions.
      It is now possible to change a Blind drop mount point back to Limit to root directory in Easy settings.
    • The Log Folder Viewer interface would perform poorly if the SSH Server was generating a large number of log files, for example due to intense server activity combined with a small log file rollover threshold. The Log Folder Viewer now improves this by limiting the frequency of visual list updates.
  • UPnP NAT forwarding:
    • When UPnP NAT forwarding is enabled on a computer with multiple network adapters, the SSH Server was likely to try configuring the wrong gateway. For example, if the first IP address returned by Windows belonged to a Hyper-V virtual switch, this would prevent UPnP NAT forwarding from working.
      The SSH Server will now enumerate network adapters to find gateways, and will try to configure those that are suitable.
    • UPnP gateway forwarding is now disabled for IPv6 addresses. In previous versions, the SSH Server would attempt to perform the same UPnP actions for IPv6 as it does for IPv4 addresses. This is not effective for IPv6, and would only generate errors.
      In 9.xx versions, we will be adding experimental support for UPnP IPv6 pinholes. However, we were unable to find any devices with which to test this for 8.xx versions. Therefore, the SSH Server will currently not attempt any UPnP actions for IPv6 addresses.
  • General:
    • When multiple SSH Server instances are being installed, instance name conflicts are intended to be detected during installation. However, the check is also performed after installation. The after-installation check did not function on 64-bit systems and would not detect conflicts. Fixed.


Zaloguj lub Zarejestruj się aby zobaczyć!


Zaloguj lub Zarejestruj się aby zobaczyć!
 
Ostatnia edycja:

helium

Bardzo aktywny
Ekspert
Dołączył
16 Czerwiec 2010
Posty
2015
Reakcje/Polubienia
2315
Miasto
Kraków
Bitvise SSH Server 9.12 [ 1 January 2022 ]

  • Windows session cache: Multiple connections for the same user, either concurrent or consecutive, can now use the same Windows session. This can greatly improve reliability for clients that make frequent connections that access network shares.
  • Network share control: Settings now provide additional control over how network share connections are established where such connections could time out or occasionally fail.
  • Encrypted volumes: Clients can now access files which are encrypted at rest by the SSH Server. Concurrent users can access virtual filesystem mount points backed by one or more encrypted volumes. A volume is encrypted with a key configured in SSH Server settings.
  • SFTP jump server: Users can now access virtual filesystem mount points backed by a remote SFTP server to which the SSH Server connects on the user's behalf.
  • Tasks: The SSH Server can now run commands periodically, or triggered by configurable conditions based on recorded log events.
  • Email notifications: The SSH Server can now send email notifications triggered by configurable conditions based on recorded log events.
  • Log file maintenance: Automatic log file archival or deletion can now be configured as a scheduled task, without resorting to the Windows Task Scheduler.
  • Cryptography: New cryptographic algorithms include chacha20-poly1305 and encrypt-then-MAC hashing.

Zaloguj lub Zarejestruj się aby zobaczyć!
 

helium

Bardzo aktywny
Ekspert
Dołączył
16 Czerwiec 2010
Posty
2015
Reakcje/Polubienia
2315
Miasto
Kraków
Bitvise SSH Server 9.14 [ 23 January 2022 ]

  • Upgrade:
    • When upgrading from versions before 9.xx, the automatic log archival task is now disabled. This is to avoid interfering with any log maintenance the administrator has already set up.
    • If settings before 9.xx configured no limit to the number of simultaneous connections, such settings would be upgraded incorrectly to apply a lower limit. Fixed.
  • FTPS:
    • If the FTPS protocol is enabled, the SSH Server now supports TLS 1.3 on Windows versions where it is available. Currently, this requires Windows 11 or Windows Server 2022.
  • Tasks:
    • Log maintenance and command execution tasks now log an Info-level log event when they start.
    • Task triggers now support endsWith and contains as operators that work on strings. The contains operator also continues to work on structures, as it did previously.
  • Control Panel and Settings:
    • When configuring an encrypted volume in Advanced settings, the setting Full path to data file would have a misleading browse interface which did not allow selecting a filename which does not yet exist. Instead, a full path to a nonexistent file had to be entered manually. The browse interface now supports configuring a file which does not yet exist.
    • The Log Folder Viewer was not showing file icons in version 9.12. Fixed.
    • In the Statistics CSV export dialog, suggested filenames could include invalid characters. Fixed.
    • In account and group lists, reduced the number of columns for improved clarity and performance.
  • Command-line utilities:
    • The log utility did not work at all in version 9.12. Fixed.

Zaloguj lub Zarejestruj się aby zobaczyć!
 

helium

Bardzo aktywny
Ekspert
Dołączył
16 Czerwiec 2010
Posty
2015
Reakcje/Polubienia
2315
Miasto
Kraków
Bitvise SSH Server 9.17 [ 12 March 2022 ]

  • Installation and update:
  • Due to a bug in the log utility included with SSH Server version 9.12, using built-in update functionality to update from version 9.12 to versions 9.14 and 9.16 would fail. Now, when updating from version 9.12, the first attempt will still fail, but will replace the log utility so that a second attempt succeeds.
    Running the new version installer directly to update manually works for all versions and does not trigger this issue.
  • When an SSH Server update was started automatically, but uninstallation of the existing version failed, the SSH Server would not automatically restart. When updating to future versions from version 9.17 or higher, if uninstallation fails but rollback succeeds, the main SSH Server service will now be restarted.
  • Settings:
    • When pasting from clipboard, password fields would accept ASCII control characters, including newline characters that are included by Excel when copy & pasting a selected cell. Password fields will now filter out control characters when pasting, including the Tab character.
  • SSH:
    • Improved detection of misconfigured obfuscation settings.
  • File transfer:
    • In previous versions including 8.xx, if an SCP client interrupted a download – such as by disconnecting – the SSH Server's SCP subsystem would still completely read the file and record a complete download in the I_SFS_TRANSFER_FILE event. Interrupted SCP downloads are now correctly logged as incomplete.

Zaloguj lub Zarejestruj się aby zobaczyć!
 

helium

Bardzo aktywny
Ekspert
Dołączył
16 Czerwiec 2010
Posty
2015
Reakcje/Polubienia
2315
Miasto
Kraków
Bitvise SSH Server 9.18 [ 5 May 2022 ]

  • Installation and update:
    • Improved reliability of creating temporary directories which could previously cause installation to fail.
  • Control Panel:
    • Fixed behavior of the pop-up menu when clicking the notification area icon.
    • Added support for Ctrl+A and Ctrl+Backspace key combinations in a variety of user interface elements that did not previously support them.
    • Addressed support for Esc and Tab keys in the Manage certificates dialog.
    • Fixed issue when deleting log files in the Log folder viewer.
    • In Easy settings, the Back and Next buttons were incorrectly swapped. Fixed.
  • Connections:
    • In previous 9.xx versions, the Connection timeout feature did not work. Fixed.
  • Tasks:
    • Configuring an On-logon command for an Execute command task would result in an error when running the task. Fixed.
    • Improved elevation handling for Windows sessions created for tasks.
  • SFTP jump server mount points:
    • Greatly improved diagnostic logging for connection issues when configuring Another SFTP server mount points.
    • Fixed an issue which would cause the SSH Server to emit an invalid SFTP packet when using Another SFTP server mount points. This would cause repeated connects and disconnects.

Zaloguj lub Zarejestruj się aby zobaczyć!
 
Do góry