WinRAR - wersje stabilne

OXYGEN THIEF

Bardzo aktywny
Członek Załogi
Administrator
Dołączył
26 Maj 2010
Posty
35387
Reakcje/Polubienia
24420
Miasto
Trololololo
Ukazała się najnowsza wersja programu WinRAR
WinRAR 4.00
Version 4.00

1. RAR decompression speed is improved. Depending on data type,
decompression can be up to 30% faster than in previous versions.

Both the general RAR algorithm and most of special RAR multimedia
methods benefit from this improvement. The only module of RAR
algorithm, which is not affected, is "Text compression" method.

2. Changes in ISO support:

a) UDF support is upgraded to UDF 2.50 revision. It makes possible
to unpack most of Blu-ray ISO files;

b) when browsing UDF ISO file, UDF revision number is displayed
after the "UDF" format name in WinRAR address bar
and in archive information dialog;

c) WinRAR sets the folder modification date when unpacking folders
stored in UDF and ISO9660 files.

3. Changes in password dialog:

a) WinRAR uses the same format of password dialog both when archiving
and extracting, so "Show password" option is available also
when extracting;

b) "Organize passwords..." button in password dialog provides
access to password organizer interface, where you can specify
your frequently used passwords. You will be able to access these
saved passwords using the drop down list or autocomplete feature
in password dialog.

It is important to know that saved passwords are not encrypted
and anybody having access to your computer can view them.
Use "Organize passwords" feature only if your computer is
protected from unauthorized access;

c) "Use for all archives" option is available in password dialog
when unpacking several archives at once. You can utilize it
to apply an entered password to all archives.

If you use this option with an empty password, WinRAR will skip
all encrypted archives;

d) Unlike previous versions, the password from default compression
profile is not used for extraction.

If you wish to use the same password for all extracting archives,
press "Organize passwords..." button in the password dialog
and define a new password entry, specifying "*" file mask
in "Select for archives" field.

4. In Windows 7 WinRAR will display the total operation progress
also on WinRAR icon on Windows taskbar. You can disable it using
"Taskbar progress bar" option on "General" page of WinRAR settings.

5. Numerous Unicode support improvements allow to process non-English
file names more smoothly. These improvements include:

a) better Unicode handling in WinRAR in "Rename", "Convert",
"Find" and other commands, in folder tree panel, in password
request dialog and in many other parts of WinRAR interface;

b) correctly displayed Unicode names in WinRAR items in Explorer
context menus;

c) Unicode support in .lng files, making WinRAR localization
possible for Unicode only languages.

6. Changes in -x switch syntax. Now you can specify a wildcard
exclusion mask for folders. Such mask must have the trailing '\'
character, like -x*tmp*\ or -x*\temp\

7. New "Extract relative paths" option in "Advanced" part of extraction
dialog. If you browse some archive subfolder in WinRAR shell
and enable "Extract relative paths" option, the path part up to
and including the current subfolder will be removed from extracted
file paths.

For example, if you are inside of "Backup\MyData" archive folder
and extract "Images" folder, it will be extracted as "Images",
not as "Backup\MyData\Images".

This option is the new default extraction mode, but you can change
the default back to WinRAR 3.x style. Just select "Extract full paths"
and then press "Save settings" in "General" part of extraction dialog.

8. Windows 98, Windows Me and Windows NT are not supported by WinRAR
and WinRAR self-extracting modules anymore. Minimum Windows version
required for WinRAR 4.0 is Windows 2000.

If you need to run WinRAR on older Windows, you can download
previous WinRAR versions from
Zaloguj lub Zarejestruj się aby zobaczyć!


9. If TAR, TAR.GZ or TAR.BZ2 archive contains symbolic or hard links
and if destination file system is NTFS, WinRAR will create these
links when unpacking such archive. WinRAR will create symbolic links
as symbolic and hard links as hard in Windows Vista and newer
and it will create all links as hard in older Windows.

If destination file system is FAT32 or any other not supporting
file links, WinRAR will skip links when unpacking TAR, TAR.GZ
and TAR.BZ2 archives.

10. Recovery volume processing involves less disk seek operations
resulting in higher performance.

11. You can select Windows 7 library in tree panel in extraction dialog
and WinRAR will use its default save location as the destination path.

12. "Report" command allows to select HTML, Unicode text and usual text
as output format for report file. Unlike previous WinRAR versions,
now WinRAR preservers Unicode characters in reports when using HTML
or Unicode text format. So non-English characters in file names
will be displayed properly in such reports.

13. Message list in GUI SFX archives displays only operation status
and error messages. It does not contain names of all extracted files
anymore. This change improves the speed and reduces memory requirements
for SFX archives containing a large number of files. Also it makes
easier to locate error messages, because they are not hidden among
extracted file names.

14. GUI SFX archives display "Extract" button instead of "Install"
if no "Setup" or "Presetup" commands are present in the archive
comment. If you prefer "Install" button, but do not need to
execute any setup programs, you can add "Setup=<>" command.

15. WinRAR displays the current percent above the operation progress bar
when repairing an archive containing the recovery record
and when processing recovery volumes.

16. WinRAR limits the maximum possible volume size to 4 GB minus 1 byte
when creating RAR volumes on a disk with FAT or FAT32 file system
in volume size autodetecting mode. These file systems do not support
4 GB and larger files.

17. If "Wait if other WinRAR copies are active" option is enabled
and WinRAR waits for another copy, you can press "Continue" button
in command progress window to force WinRAR to stop waiting.
So now "Continue" button allows to override the state of
"Wait if other WinRAR copies are active" option for current operation.

18. WinRAR displays one password request instead of two, when saving
an encrypted file back to RAR or ZIP archive after modifying it
in some external editor. Previous WinRAR versions usually requested
the password twice, both when extracting the original file
and archiving its modified copy. Only RAR archives with encrypted
file names were processed with the single password prompt.

19. New error code 10 ("no files") is added to list of error codes
returned in command line mode by RAR and WinRAR. This new code
can be returned by archive, extract, delete and repair commands.
It means that RAR did not find any files matched the specified
file or archive mask.

20. File name area in file overwrite dialog occupies several lines now.
It makes possible to display much longer names.

21. Now switch -ep3 converts not only disk letters, but also UNC paths.
So \\server\share will be converted to __server\share when archiving
and restored to the original \\server\share when extracting with -ep3.

22. New "Background extraction" option in "Advanced" part of extraction
dialog places WinRAR into background, when extracting files.
You can save its default state with "Save settings" button in "General"
part of extraction dialog, just like for other extraction options.

"Background archiving" option from the default compression profile
does not affect the extraction behavior anymore.

23. "Mode..." button in operation progress window is enabled also
when extracting or testing archives. It provides access to
"Command parameters" dialog, where you can set "Turn PC off when done"
option for extraction and test operations.

Previously this dialog was accessible only when archiving.

24. Bugs fixed:

a) renaming a file in archive could also rename all other files
with the same name in other folders of the same archive;

b) previous versions displayed the wrong total packed size
in "Info" command for multivolume CAB archives;

c) in ZIP archives 'U' (update) and 'F' (fresh) commands could
erroneously update even files not specified in the command line.
It happened only for files in current folder which names matched
files in ZIP archive. This bug was not present in usual 'A' (add)
archiving mode.
Niestety nie ma jeszcze wersji Polskiej
Zaloguj lub Zarejestruj się aby zobaczyć!

Zaloguj lub Zarejestruj się aby zobaczyć!
 

Naits

Bardzo aktywny
Dołączył
7 Wrzesień 2010
Posty
932
Reakcje/Polubienia
6
trzeba poczekać na Polską :) ale wiele pewnie zmian to nie ma względem bety
 
A

Anonymous

WinRAR 4.01
Version 4.01

1. Added support for file sizes stored in binary format in TAR archives.
Some TAR archives use the binary size format instead of octal
for files larger than 8 GB.

2. Bugs fixed:

a) "Repair" command failed to properly reconstruct structure
of RAR archives, which contained at least one file with packed
size exceeding 4 GB.

This bug did not affect the recovery record based repair.
It happened only if recovery record was not found and WinRAR
performed reconstruction of archive structure;

b) even if "Do not extract paths" option in "Advanced" part of
extraction dialog was set as the default, WinRAR still unpacked
file paths if called from Explorer context menu;

c) after entering a wrong password for encrypted ZIP archive,
sometimes WinRAR ignored subsequent attempts to enter a valid
password;

d) "Wizard" command did not allow to create self-extracting
and multivolume archives, when compressing a single folder
or a file without extension;

e) "Import settings from file" command did not restore multiline
comments in WinRAR compression profiles;

f) when converting RAR volumes having name1.name2.part#.rar name format,
"Convert archives" command erroneously removed ".name2" name part.
So resulting archive had name1.rar file name instead of expected
name1.name2.rar;

g) RAR could crash when creating a new archive with -agNNN switch
if archive number in generated name was 110 or larger;

h) WinRAR failed to display non-English file names in 7-Zip archives
properly if they used a non-default code page. It was the display
only problem, such names were unpacked correctly.

English:
32bit:
Zaloguj lub Zarejestruj się aby zobaczyć!

64bit:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

OXYGEN THIEF

Bardzo aktywny
Członek Załogi
Administrator
Dołączył
26 Maj 2010
Posty
35387
Reakcje/Polubienia
24420
Miasto
Trololololo
WinRAR 4.10
WinRAR - What's new in the latest version


Version 4.10

1. WinRAR can create ZIP archives of practically any size.

2 GB archive size and 65535 file number ZIP limitations of previous
WinRAR versions are not valid anymore.

2. WinRAR can create multivolume ZIP archives, which are also known as
split ZIP files.

ZIP volumes have names like 'volname.zip', 'volname.z01', 'volname.z02'.
Use a volume with ".zip" file extension in all archive processing
operations like starting extraction or opening an archive.

Unlike RAR volumes, ZIP volumes cannot be self-extracting.

WinRAR needs to have access to all ZIP volumes of multivolume file set
at the same time, when creating or unpacking them. So it is impossible
to create or unpack ZIP volumes on removable disks, one volume
per disk. You need to create them all in the same folder.

3. Added the high precision file time support in ZIP archives.
WinRAR can store and extract modification, creation and last access
file time in ZIP archives with 100 nanosecond precision.

You need to set "High precision modification time" option in "Time"
part of archiving dialog to store all 3 times in archive.
Set appropriate "File time" options in "Advanced" part of extraction
dialog to choose times to extract.

4. Added support for Unicode names stored in ZIP extra field data.
Different ZIP tools store Unicode names either in file header
or in ZIP extra field and now WinRAR can correctly process both types
of Unicode names.

5. "Synchronize archive contents" option and -as command line switch are
supported in ZIP format.

6. Modifications of switch -ag behavior:

a) -ag can be used with all RAR and WinRAR commands, not just
with archiving only;

b) 'N' format character behavior differs in archiving and non-archiving
operations. When archiving, it is incremented until the first unused
name is found. In non-archiving operations like extracting it selects
the existing archive preceding the first unused name;

c) 'I' format character allows to specify minutes regardless of presence
and position of 'H' (hours) in format string. It can be used
instead of 'M' (minutes), when you wish to place minutes before hours
or do not need hours at all.

7. By default, WinRAR proposes to update an archive if viewer modified
an opened file or created any new files. New "Ignore modifications for"
option in "Settings/Viewer" dialog allows to disable such behavior.
You can enter one or several file masks separated by spaces here
and WinRAR will not prompt to update an archive if file created
or modified by viewer matches one of these masks.

8. Changes in volume size input field. Now you can select size units
in the drop down list to the right of volume size. Previous way
to define size modifiers, by entering 'k', 'm', etc. character
after the numeric size value, is also supported.

9. Changes in "Predefined sizes" in "Define volume sizes" dialog.
Floppies and ZIP disks are replaced by 5 MB and 100 MB volumes,
added new entries for maximum FAT32 file size and for Blu-ray disks.

10. New "Wipe files if password is set" option in "Options" page of
archiving dialog. If you prefer to always delete encrypted files
securely, you can enable "Wipe files if password is set"
in the default compression profile.

11. New "Wipe temporary files/Encrypted only" option in "Settings/Security".
It allows to use a slower and more secure delete for temporary files
extracted from archives identified by WinRAR as encrypted.
Quick delete is used for all other temporary files.

12. Changes in "Convert archives" command:

a) now it is possible to convert encrypted archives. Previously
"Convert archives" command skipped them.

Though, if you still prefer to skip them, you can do it
by enabling "Skip encrypted archives" option in "Convert archives"
dialog. It might be useful if you wish to run the conversion
command in unattended mode, avoiding password prompts;

b) special "rar2" archive type, which was specific for RAR 1.x
and 2.x archives, is removed. Now "rar" archive type controls
conversion of all versions of RAR archives.

Since the convert command does not need to detect RAR archive
version anymore, the initial search for archives is performed
faster, resulting in shorter delay before displaying
"Convert archives" dialog.

13. New -log[fmt][=name] switch allows to write archive and file names
to log file in archiving command for RAR and ZIP formats and also
in extracting, deleting and listing commands for RAR format.

This switch is especially useful, when you need to further process
an archive created with -ag or -v switches, because -log provides
the archive name generated by WinRAR.

14. New -@[+] switch allows to process all parameters starting from
'@' character either as file names (-@) or as file lists (-@+).

15. "Setup program" SFX options are moved from "General" to "Setup" page
of "Advanced SFX options" dialog. Both "Run after extraction"
and "Run before extraction" are now multiline, so it is possible
to specify several setup programs for same SFX archive.

16. "SetupCode" SFX script command instructs SFX archive to wait
for termination of setup program and return the exit code of
setup program increased by 1000 as the exit code of SFX executable.

GUI equivalent of this command is "Wait and return exit code" option
on "Setup" page of "Advanced SFX options" dialog.

17. SFX does not support "S" (create in the top level of Start Menu)
"Shortcut" command mode anymore. Recent Windows versions do not allow
programs to add items to the top of Start Menu.

18. Volume size in archiving and wizard dialogs can be specified as
a decimal fraction. Decimal mark is defined by Windows regional
settings.

-v command line switch also allows decimal fractions.
In command line mode the dot (.) is always used as the decimal mark.
For example, -v1.5g switch means 1.5 gigabytes.

Zaloguj lub Zarejestruj się aby zobaczyć!
 
A

Anonymous

WinRAR 4.11
Version 4.11

1. Bugs fixed:

a) WinRAR did not store NTFS "Compressed" attribute, when creating
RAR archives;

b) WinRAR crashed in command line mode if @filelist parameter
was present and 'filelist' did not exist. This bug affected
only WinRAR.exe, not RAR.exe;

c) if -x*\somefolder\* exclusion mask was specified when archiving
and if name of current folder contained 'somefolder',
WinRAR excluded all files and stopped creating an archive;

d) GUI self-extracting archives did not work in Windows
Preinstallation Environment (Windows PE).

Zaloguj lub Zarejestruj się aby zobaczyć!
 
A

Anonymous

WinRAR v5.00 Final
WinRAR - What's new in the latest version

Version 5.00

1. New RAR 5.0 archiving format. You can use "RAR 5.0" option
in archiving dialog or -ma command line switch to create
RAR 5.0 archives.
Older software including older WinRAR versions is not able to
decompress RAR 5.0 archives, so if you plan to send an archive
to other people, it is necessary to take the compatibility issue
into consideration. You can select "RAR" instead of "RAR5" option
in archiving dialog to create RAR 4.x archives compatible with
previous WinRAR versions.

2. Changes in RAR 5.0 compression algorithm:

a) maximum compression dictionary size is increased up to 1 GB
in 64 bit WinRAR. 32 bit WinRAR version can use up to 256 MB
dictionary when creating an archive. Both 32 bit and 64 bit
versions can unpack archives with any dictionary size,
including 1 GB;

b) default dictionary size for RAR 5.0 is 32 MB, typically resulting
in higher compression ratio and lower speed than RAR 4.x 4 MB.
You can use "Dictionary size" archiving dialog option or -md
switch to change this value;

c) -md switch syntax is modified to support larger dictionary
sizes. Append 'k', 'm' and 'g' modifiers to specify the size
in kilo-, mega- and gigabytes, like -md64m for 64 MB dictionary.
If modifiers are not present, megabytes are assumed,
so -md64m is equal to -md64;

d) RAR 5.0 format includes Intel IA-32 executable and delta
compression algorithms, but RAR 4.x text, audio, true color
and Itanium algorithms are not supported. These excluded algorithms
are not efficient for modern data types and hardware configurations;

e) RAR 5.0 decompression can utilize several CPU cores.
Though not to same extent as in compression algorithm,
it improves the decompression speed on large files
with poorly compressible data or when using BLAKE2 checksums.

3. Changes in RAR 5.0 archive format:

a) file times are stored as Coordinated Universal Time (UTC)
instead of former local time, making file exchange among
several time zones more straightforward;

b) file names and archive comments use UTF-8 encoding.

4. RAR 5.0 recovery record is based on Reed-Solomon error correction
codes. If recovery record size is large enough, 5% and more,
the new error correction scheme provides much higher resistance to
multiple damages comparing to RAR 4.x recovery record.
Smaller record, such as 1 - 2%, or less random damage type would
result in less difference between 4.x and 5.0. For single continuous
damage 4.x and 5.0 efficiency is about the same.
Additionally to usual data erasures, the new recovery record
is able to detect deletions and insertions of much larger size
than in previous RAR versions. Maximum insertion size is several
megabytes. Maximum deletion size depends on the damage type
and in some cases can be as large as the recovery record size.
Still, the best recovery performance and efficiency is achieved
if no deletions and insertions are present, so all data including
damaged sectors preserve their original positions. Thus, if you use
some special software to copy an archive from damaged media,
it is better to choose the mode, when damaged sectors are filled by
zeroes or any other data instead of cutting them out completely
from resulting file.
RAR 5.0 recovery record is more resistant to damage of recovery record
itself and can utilize a partially corrupt recovery record data.
Note, though, that "Repair" command does not fix broken blocks
in recovery record. Only file data are corrected. After successful
archive repair, you may need to create a new recovery record
for saved files.
New recovery record is not based on 512 byte sectors anymore
and incorporates more complicated data structures. So it is impossible
to specify its size in sectors. For RAR 5.0 archives the parameter of
-rr[N] switch and rr[N] command is always treated as a percent of
archive size regardless of presence of % character. Typically N%
recovery record can repair up to N% of continuously damaged data
and increases the archive size by only slightly more than N%.
Ability to fix multiple damages is proportional to N.
We used "Screaming Fast Galois Field Arithmetic Using Intel
SIMD Instructions" paper by James S. Plank, Kevin M. Greenan
and Ethan L. Miller to improve Reed-Solomon coding performance.
Also we are grateful to Artem Drobanov and Bulat Ziganshin
for samples and ideas allowed to make Reed-Solomon coding
more efficient.

5. "Test" command verifies validity of RAR 5.0 recovery record.
Recovery record is tested after processing all archived files.
If corrupt archive contains the recovery record, it might be possible
to repair it even if recovery record validity test is failed.
"Repair" command attempts to utilize even a partially damaged
recovery record. So treat the negative recovery record test result
as a reason to re-create the archive if original files are still
available, but not as a reason to avoid "Repair" command.

6. Changes in RAR 5.0 encryption algorithm:

a) encryption algorithm is changed from AES-128 to AES-256 in CBC mode.
Key derivation function is based on PBKDF2 using HMAC-SHA256;

b) special password verification value allows to detect most of
wrong passwords without necessity to unpack the entire file;

c) if archive headers are not encrypted ("Encrypt file names" option
is off), file checksums for encrypted RAR 5.0 files are modified
using a special password dependent algorithm, to make impossible
guessing file contents based on checksums. Do not expect such
encrypted file checksums to match usual CRC32 and BLAKE2 values.

7. RAR 5.0 archives allow to utilize 256 bit length BLAKE2sp hash

Zaloguj lub Zarejestruj się aby zobaczyć!
instead of 32 bit CRC32 as a file checksum.
Enable "Use BLAKE2 file checksum" option in "Options" page of
archiving dialog or specify -htb command line switch to use BLAKE2
checksums.
While producing slightly larger archives, BLAKE2 can be used
for file contents identification. If two files have the same
BLAKE2 value, it practically guarantees that file contents
is the same. BLAKE2 error detection property is also stronger
than in much shorter CRC32.

8. Features removed:

a) authenticity verification feature did not provide the required
level of reliability and was removed;

b) switch -en (do not add "end of archive" block) is not supported
by RAR 5.0 archives, which always have the end of archive block.
This block helps WinRAR to safely skip external data like
digital signatures appended to archive;

c) old style extension based arcname.rNN volume names are not
supported by RAR 5.0 archives, which use only arcname.partN.rar
volume names;

d) file comments are not supported anymore both in RAR 4.x
and RAR 5.0 archives. Console RAR 'cf' command is removed.
It does not affect the archive comment support, which is present
in both versions of archive format and is not planned for removal.

9. "Set password" command and "Dictionary size" option are moved to
"General" page of archiving dialog.

10. You can use "Save symbolic links as links" option on "Advanced" page
of archiving dialog to save and restore NTFS symbolic links
and reparse points as links, so their contents is not archived.
Command line equivalent of this option is -ol switch.
Similar option for NTFS hard links is "Save hard links as links".
Its command line equivalent is -oh switch.
Both options are available only for RAR 5.0 archive format.

11. Added extraction only support for XZ archive format.

12. Changes in recovery volume processing in RAR 5.0 archive format:

a) maximum number of RAR+REV volumes in RAR 5.0 format is 65535
instead of 255;

b) recovery volume operations are faster than in RAR 4.x;

c) additionally to recovery data, RAR 5.0 REV files also store
service information such as checksums of protected RAR files.
So they are slightly larger than RAR volumes which they protect.
If you plan to copy individual RAR and REV files to some removable
media, you need to take it into account and specify RAR volume
size by a few kilobytes smaller than media size.

13. Maximum path length for files in RAR and ZIP archives is increased
up to 2048 characters.

14. Command line RAR returns the exit code 11 if it can detect that
user entered a wrong password. This code can be returned only
for RAR 5.0 archives. It is impossible to distinguish a wrong
password and data damage for RAR 4.x archives.

15. 'v' and 'l' commands display archived file names in the end of line,
not in that beginning as before. Also some fields previously
available in 'l' and 'v' output are now shown only by 'lt' and 'vt'.
'vt' and 'lt' commands provide the detailed multiline information
for every archived file.
'vta' and 'lta' also include service headers into list.

16. Now the default charset for filelists in commands like
'rar a arcname @filelist' is ANSI for both WinRAR and console RAR.
In previous versions it was ANSI for WinRAR and OEM for console RAR.
You can use -scl switch to override this default.

17. Internal WinRAR viewer can detect and display files in UTF-8
and UTF-16 little endian encodings.

18. UTF-16 little endian encoding is used in RAR and WinRAR log file
rar.log, so Unicode file names are stored in the log correctly.
WinRAR automatically truncates the old rar.log file in non-Unicode
format to avoid mixing different encoding in the same log file.
In case of console RAR you need to delete the old rar.log manually,
otherwide RAR will append UTF-16 messages to existing rar.log.
You can use -scg switch to change the default log file
encoding, such as -scag for ANSI encoding.

19. Command line 'r' (repair) command can include an optional destpath\
parameter defining the destination folder for repaired archive:
rar r archive.rar destpath\

Zaloguj lub Zarejestruj się aby zobaczyć!

Zaloguj lub Zarejestruj się aby zobaczyć!
 

saper1972

Bardzo aktywny
Zasłużony
Dołączył
5 Lipiec 2010
Posty
258
Reakcje/Polubienia
1
Na polską wersję znowu poczekamy z miesiąc czasu.
 

Emmers

Bardzo aktywny
Ekspert
Dołączył
25 Marzec 2012
Posty
2231
Reakcje/Polubienia
786
Miasto
Hajnówka
saper1972 napisał:
Na polską wersję znowu poczekamy z miesiąc czasu.

Wersja 32 bit

Zaloguj lub Zarejestruj się aby zobaczyć!

Wersja 64 bit

Zaloguj lub Zarejestruj się aby zobaczyć!

Przetłumaczone są wszystkie moduły programu, zajęło mi to dwie doby... Oczywiście nie jest to tłumaczenie autoryzowane przez producenta. Pozdrawiam
 

saper1972

Bardzo aktywny
Zasłużony
Dołączył
5 Lipiec 2010
Posty
258
Reakcje/Polubienia
1
Dziękuję serdecznie :) i proszę amatorowi z odpowiednią wiedzą i chęciami zajęło to dwie doby, oficjalnemu supportowi zajmie to miesiąc, ot podejście do klienta.
 

Emmers

Bardzo aktywny
Ekspert
Dołączył
25 Marzec 2012
Posty
2231
Reakcje/Polubienia
786
Miasto
Hajnówka
Czy mógłby ktoś sprawdzić dokładnie jak zachowuje się wersja 64 bit,czy działa integracja z interfejsem systemu i można skojarzyć rozszerzenia z powłoką. Pytam dlatego ponieważ dostałem sygnał , że nie można skojarzyć archiwów RAR i ZIP w wersji 64 bit, a nie jestem w stanie sprawdzić tego osobiście.
 
Do góry