Hard Disk Sentinel Professional

andyxa

andyxa

Bardzo aktywny
Fąfel
Dołączył
29 Grudnia 2011
Posty
2119
Reakcje/Polubienia
977
Hard Disk Sentinel - to przydatne narzędzie do monitorowania dysków twardych HDD i SSD. Program wyszukuje, analizuje, testuje i naprawia ( jeśli wystąpią) problemy związane z dyskiem twardym.

Hard Disk Sentinel wyświetla szczegółowe informacje o dyskach twardych, monitoruje stan dysku twardego, temperaturę i wszystkie parametry SMART.Wiele różnych alertów i opcji raportów jest dostępnych dla zapewnienia maksymalnego bezpieczeństwa cennych danych na dyskach.
Kliknij aby rozwinąć...

Hard Disk Sentinel 4.40 (11/7/2013)
Improvements and new features:
displaying health (actual and original) during Disk -> Surface test functions
improved display of S.M.A.R.T. attribute changes: automatically showing more dates based on screen resolution
double click on S.M.A.R.T. attribute graphs to toggle showing all measured values
right click on S.M.A.R.T. attribute graph to export all displayed values
improved hardware self tests (Short self test, Extended self test) on various internal and external drives (previously reported "Interrupted with hardware/software reset" caused by special power management implementations)
improved report of hard disk status and attributes for SCSI / SAS hard disks
improved re-adjust Automatic Acoustic Management / Advanced Power Management levels on startup when required
improved "sending files in e-mail" project
log data communication errors
added Slovak language support (thanks to Lukas Surin for translation)
Improved hardware support:
added support of Seagate External hard disks, newer Seagate USB hard disks, FreeCom external hard disks
added support of Adaptec 7xxx series RAID controllers in RAID mode: detection of complete hard disk status when SATA or SAS hard disks configured as RAID arrays.
added support of Adaptec 2200S, 2120S, 2130S, 2230S SCSI controllers in RAID mode: detection of complete hard disk status when SCSI hard disks configured as RAID arrays.
added support of PROMISE SuperTrak RAID controllers in RAID mode: detection of complete hard disk status when SATA hard disks configured as RAID arrays.
added support of PROMISE FastTrak RAID controllers in RAID mode: detection of hard disks in the arrays and their general S.M.A.R.T. status
added support of PROMISE enclosure information: displaying fan speed, temperature and voltage provided by the Promise enclosure
added support of IBM M1115, SuperMicro SMC2108 RAID controller: detection of complete hard disk status when SATA hard disks configured as RAID arrays.
added support of HighPoint RS5122B USB docking station
added support of HighPoint Datacenter DC7280 controller
general improvements for external USB 3.0 multi-drive enclosures
improved support for Win XP 64 bit & different RAID controllers (Gigabyte, VIA, JMicron, etc.)
improved support of JMicron USB 3.0 / eSATA RAID enclosures
improved support of LSI, Intel SAS/SATA RAID controllers, displaying hot spare and unconfigured drive(s)
improved support of HighPoint, Areca, LSI RAID controllers
improved support of various hard disks (high capacity, 2-3-4 TB models) and newer SSD models (ADATA, OCZ, Samsung, Plextor, etc)
improved compatibility for various card readers, pendrives
improved detection of standalone (non-RAID) hard disks with HighPoint and Areca controllers
improved support and compatibility for newer Intel RST drivers (12.x versions)
Bug fixes, further modifications:
fixed: service mode startup problems on some non-English Windows systems
fixed: previous versions may displayed error at startup if WMI libraries damaged / corrupted
fixed: webStatus displayed partial information if Intel SSD used in the system
fixed: disk-specific settings were not saved for some Intel SSD models
fixed: startup may failed when Acronis software used to split 2+ TB hard disks
fixed: Portable version startup after uninstallation of license from the actual system
fixed: custom icon set setting may reset after standby
Kliknij aby rozwinąć...


Zaloguj lub Zarejestruj się aby zobaczyć!
 
Ostatnio edytowane przez moderatora:
andyxa

andyxa

Bardzo aktywny
Fąfel
Dołączył
29 Grudnia 2011
Posty
2119
Reakcje/Polubienia
977
Hard Disk Sentinel 4.50 (30/1/2014)
Improvements and new features:
Disk -> Short self test, Extended self test options available for SCSI and SAS hard disks
option to disable "Always-on-top" behaviour of Status Windows (Configuration -> Status Window)
double click on the installation date on Preferences page to configure installation date for the correspind hard disk / SSD and display daily average writes/reads based on that installation date
improved and faster startup of disk surface tests on drives with lower health
improved text description and improved report for hard disks / SSDs
improved backup projects and file handling
advanced health detection and reporting on various hard disk models (Samsung, Seagate, Hitachi, Toshiba, Western Digital)
added Japanese language support (thanks Kyo for the translation)
Improved hardware support:
added support for Promise 4650, 8650, 16650 SATA/SAS controllers: detection of complete hard disk status when SATA or SAS hard disks configured as standalone or as RAID arrays.
added support for LSI SAS3 (SAS 12G) 3008 Fury Series SATA/SAS RAID controllers: detection of complete hard disk status when SATA or SAS hard disks configured as standalone or as RAID arrays.
added support for IBM M5115 SATA/SAS RAID controllers: detection of complete hard disk status when SATA or SAS hard disks configured as standalone or as RAID arrays.
added support for BroadCom / Ciprico RAIDCore SATA controllers: detection of complete hard disk status when SATA hard disks configured as standalone or as RAID arrays.
detection of all hard disks from RAID arrays configured by AMD integrated RAID controller. Report generic status (Good or failure predicted) for second and further drives and displaying complete information for the first hard disk. Works with driver 3.2.1540.92 ONLY (newer drives do not work) available from the Driver Zone. See Updating driver for AMD AHCI Compatible RAID Controller page for details.
detection of Adaptec RAID controller temperature and SES2 enclosure information
detection of possible S.M.A.R.T. information and reporting health for pendrives if supported, for example Sandisk Cruzer Extreme series
improved support for NVidia chipsets, Intel RAID arrays and newer Intel RST drivers
improved detection and compatibility with LSI controllers, Intel RES2SV240 SAS expander
improved support for Corsair, Crucial, Kingston, Samsung, Sandisk SSDs in general
improved compatibility and features of JMicron internal and external RAID arrays, showing hot-spare drive status as well
improved compatibility with APPLE SSDs
improved compatibility with various memory card readers, pendrives
Bug fixes, further modifications:
fixed "connection timeout" errors displayed when e-mail sending configured by @gmail account
fixed temperature display after swapping hard disks
fixed sidebar gadget temperature image when service mode used
fixed reload of previously saved configuration
fixed display of multiple errors detected in the hard disk log
user interface modifications, generic adjustments for multi-monitor systems and larger resolutions
Hard Disk Sentinel icon displayed in the list of Add/Remove programs
Kliknij aby rozwinąć...


Zaloguj lub Zarejestruj się aby zobaczyć!
 
helium

helium

Bardzo aktywny
Ekspert
Dołączył
16 Czerwiec 2010
Posty
2204
Reakcje/Polubienia
2578
Miasto
Kraków
Hard Disk Sentinel 5.00 (8/3/2017)
Improvements and new features:
  • added new disk testing method: Disk menu -> Surface test -> Repair disk drive
    designed to repair weak/pending sectors: forces the hard disk to stabilize problems and force reallocation of bad sectors
    (if required). Can be used on even system drive with running operating system (registered Pro version only)
  • added manual repair of any disk sector in Disk Contents Inspector:
    use Disk menu -> Surface test -> View (or start any surface test) and click on the disk surface map to view the raw contents of any sector. Go to the appropriate sector and if it is unreadable/reports error, the Repair button attempts to repair that (Pro version only)
  • added option to provide disk status information via WMI
    (Configuration -> Advanced options -> Provide status information by WMI)
    (disk information, status, health, temperature, text description, power on hours, bad sector count, weak sector count, comm.issue count, spin retry count, trim status, and complete S.M.A.R.T.) (registered Pro version only)
  • added option to test multiple hard disks by Disk menu -> Short self test / Extended self test (registered Pro version only)
  • added option to test multiple hard disks by Disk menu -> Surface test functions, by same test methods/options (registered Pro version only)
  • added support of high-DPI displays, including but not limited to 4K displays with high DPI scaling
  • added option to use TLS / STARTTLS in e-mail configuration regardless of port (previously used automatically only when port 587 specified)
  • added option to specify maximum try count in Disk menu -> Surface test functions before starting the test (Configuration tab)
  • added "lifetime writes" to TXT / HTML / XML reports
  • added option to perform write testing with any byte, byte/character sequence
    Disk menu -> Surface test -> Write test -> Configuration page -> Write pattern
    Specify 0xAA 0xBB etc. to specify hexadecimal sequence
  • added option to automatically save all results of disk tests:
    Configuration -> Advanced options -> Automatically save disk test results to folder
    saves images/graphs, log, results, block performance details after Disk menu -> Surface test functions
    saves image after Disk menu -> Random seek test function
    saves text report and brief log after Disk menu -> Short self test / Extended self test functions
  • automatic save of complete report upon disk status change/degradation (registered Pro version only)
  • added option: Configuration -> Advanced options -> Automatic detection based on disk utilization
    automatically prevent detection if the disk utilization shows that the hard disk is inactive (sleeping), there is no data transfer, no read/write commands (based on the Disk Performance page)
  • added option to log alerts to Windows event log: Configuration -> Message settings -> Add to Windows event log (registered version only)
  • added option to Configuration -> Message settings to execute external command (or BAT file) when alert triggered (registered Pro version only). The following environment variables set to be accessible from the started external command (or BAT file):
    HDS_TimeStamp : date and time of the actual alert in fixed format yyyymmdd hhmmss
    HDS_TimeStampClean : date and time of the alert in user-friendly format (current Windows regional setting)
    HDS_Host : current host (computer) name
    HDS_Alert : the alert (eg. Overheat)
    HDS_Disk : affected disk(s)
    HDS_Threshold : threshold configured (contain Celsius/Fahrenheit or % symbols)
    HDS_ThresholdValue : threshold configured (only the number)
    HDS_Health : generic health information of all drives
    HDS_Partition : generic partition information of all drives
    HDS_LowestDiskHealth: the lowest health % value of all drives
Improved hardware support:
  • added support for InnoDisk industrial (micro) SD memory cards: detection of complete status, health, lifetime writes and additional statistics of (micro) SD memory card.
  • added support for Delkin industrial (micro) SD memory cards: detection of complete status, health, lifetime writes and additional statistics of (micro) SD memory card.
  • added support for MagicRAM industrial (micro) SD memory cards: detection of complete status, health, lifetime writes and additional statistics.
  • added support for industrial (micro) SD memory cards and USB devices based on Hyperstone controllers: detection of complete status, health, lifetime writes and additional statistics.

    To enable status detection of industrial micro SD card detection, please select the card reader device from the list of drives and click on the Control device-specific detection label on the right, below the text description area. A new window appears, where it is possible to enable the detection. You may click on the Auto Detect button to verify if the device is responding to the detection. If yes, then the device type will be automatically selected.
    Note: in the unregistered version, the above procedure need to be done every time the software started.
    More information and example:
    Zaloguj lub Zarejestruj się aby zobaczyć!



  • added detection of LTO tape drives: detect and display health, temperature, cleaning / media status. Tested with IBM Ultrium LTO5, Tandberg LTO5 tape drives
  • added support of HP Smart Array H240, P440, B140i RAID controllers: detect status of SATA / SAS hard disks, SSDs managed and configured into RAID array(s)
  • added support of Supermicro SMC2008, SMC LSI 2208 SAS/SATA RAID controller: detect status of SATA / SAS hard disks, SSDs managed and configured into RAID array(s)
  • added support of FTS PRAID EP400i SAS/SATA RAID controller
  • detection and support of non-standard byte-per-sector values: SAS hard disks formatted with 520 bytes/sector or 528 bytes/sector. Show bytes-per-sector for SCSI/SAS drives too.
  • all disk tests (Disk menu -> Surface test functions, Disk menu -> Random seek test, Disk menu -> Short/Extended self tests) work with hard disks formatted with 520 bytes/sector or 528 bytes/sector
  • improved UASP handling, showing USB Attached SCSI (UASP) in the Interface line on the Information page
  • improved compatibility with Areca SAS/SATA RAID controllers, detection of SAS drives in addition to SATA drives on ARECA RAID controllers
  • improved compatibility with Intel / LSI embedded Megaraid controllers and newer drivers
  • improved support of HighPoint RAID controllers
  • improved support of Sandisk Extreme pendrives (reported 0% health, indicating failure on new devices due to special S.M.A.R.T. attributes)
  • improved support of Sandisk, Kingston, ADATA, Samsung, OCZ, Intel, Toshiba, Intenso, Zheino SSDs
  • improved support of external Orico, Sabrent, Sharkoon DriveLink Combo devices
  • added detection again of Via Labs Inc VL711 bridge chip - if the detection is safe (detection completely disabled in 4.71 version)
  • improved support of older SCSI HP Smart Array 642, 6400 controllers
  • improved support of LSI/Dell/Avago SATA/SAS RAID controllers and HBAs (Host Bus Adapters), improved power on state and disk self test functions with such controllers
  • improved support of JMicron external RAID enclosures and standalone devices with JMicron 56x chipsets
  • improved detection and compatibility with Marvell 9230 RAID controllers
  • added support of newer SanDisk CloudSpeed SSDs, Kingston SSDs
  • added support of NVMe SSDs from various manufacturers (Intel, OCZ, Liteon, Samsung, Toshiba, etc.)
  • added support for Toshiba OCZ RD400 NVMe SSD
  • improved power on time detection and display of many SAS/SCSI hard disks and SAS SSDs
  • improved support of 1.8" hard disk drives
  • improved support of Maxtor ATLAS SCSI / SAS hard disks
  • added support of Prolific PL3507 IDE-USB bridge
  • improved support of VIA, JMicron RAID controllers
Bug fixes, further modifications:
  • improved detection and reporting of file information if file(s) located on unreadable/repaired sectors
  • improved write tests / disk wipe functions (Disk menu -> Surface test -> Write test, Write+Read test, Reinitialise disk surface test)
  • increased Configuration window to improve readability and visibility
  • fixed: status window display with high resolution
  • fixed: disk tray icon could be completely missing if the comment was too long
  • fixed: Copy to clipboard function on logical disk information page was not working
  • fixed: disk alert window health list of all disk drives connected
  • fixed: LSI/Intel embedded controllers may lock up systems completely when accessed. Do not attempt detection when such controller found
  • fixed: do not show capacity-warning if Paragon GPT loader used
  • fixed: working again under Windows 98, ME, NT4 (previous version did not start)
  • show started test type after the test completes in the popup window
  • improved XML report output with Portable version
  • show comment field in the Open status of offline disk(s) window to help identify drives
  • user interface fixes, modifications
  • changed warranty check links
  • updated installer and signature
  • improved Russian, Chinese language support
Kliknij aby rozwinąć...
Pobieranie
Zaloguj lub Zarejestruj się aby zobaczyć!
 
Mohammad.Poorya

Mohammad.Poorya

Bardzo aktywny
Ekspert
Dołączył
19 Wrzesień 2018
Posty
3307
Reakcje/Polubienia
13406
Miasto
On a Bike!
Mohammad.Poorya

Mohammad.Poorya

Bardzo aktywny
Ekspert
Dołączył
19 Wrzesień 2018
Posty
3307
Reakcje/Polubienia
13406
Miasto
On a Bike!
Mohammad.Poorya

Mohammad.Poorya

Bardzo aktywny
Ekspert
Dołączył
19 Wrzesień 2018
Posty
3307
Reakcje/Polubienia
13406
Miasto
On a Bike!
Musisz się zalogować lub zarejestrować aby odpowiedzieć

Podobne tematy:

OXYGEN THIEF
AB Download Manager
Odpowiedzi
0
Wyświetleń
59
OXYGEN THIEF
OXYGEN THIEF
M
stacher - proste ustrojstwo do pobierania filmów/muzyki z YT, srejsbuka i innych - win mac linux
Odpowiedzi
7
Wyświetleń
145
spamtrash
spamtrash
OXYGEN THIEF
Twinkle Tray - regulacja jasności wielu monitorów
Odpowiedzi
0
Wyświetleń
36
OXYGEN THIEF
OXYGEN THIEF
al
Adobe Fresco od teraz za darmo
Odpowiedzi
0
Wyświetleń
43
al
al
C
Brightness.Manager.OK
Odpowiedzi
0
Wyświetleń
49
Camel1965
C
Do góry