ImageUSB

[alco]

ImageUSB to bezpłatny, lekki i przydatny program, za pomocą którego możemy utworzyć (sklonować) obraz całego pendrive`a do innego nośnika danych, pamięci masowej lub dysku zewnętrznego podłączonego za pośrednictwem portu USB. Program posiada mały interfejs, w którym znajdziemy wyłącznie same funkcje niezbędne do tworzenia obrazu nośnika danych.

ImageUSB jest bardzo pomocną aplikacją, oferującą możliwość szybkiego przekopiowania dużej ilości danych do innych nośników danych USB. ImageUSB kopiuje dokładnie wszystkie dane (bit po bicie) zachowując oryginalną strukturę plików oraz folderów, a także klonuje rozruchowe (samouruchamiające) nośniki danych USB. Program idealne nadaje się do tworzenia kopii zapasowych danych przechowywanych w urządzeniach USB oraz tworzy obrazy pendrive w formacie BIN (nie obsługuje innych formatów obrazów!).
instalki.pl

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Jarom]

ImageUSB 1.3.1003

Version History
===============
Here is a summary of all changes that have been made in each version of
imageUSB.
Release 1.3.1003
WIN32 release 31 Jul 2017
-Fixed a bug causing imageUSB crash on encountering excessively long or badly formatted drive serial numbers.
-Application taskbar will show current progress.
-Added Drag and Drop. Allow user to drag file from Windows Explorer when imaging method is "Write Image".
-Changed logtime from seconds elapsed to timestamp.
-Added option to turn on Beep on Completion.

Release 1.3.1002
WIN32 release 16 Sep 2016
-Fixed a bug causing imageUSB to incorrectly fail a verification by reading more bytes than available on the destination image/drive.
-Fixed a bug on Windows XP where the GUI log would display an unknown character at the end of each line.

Release 1.3.1001
WIN32 release 26 Apr 2016
-Fixed a bug causing imageUSB to incorrectly write the header block back to the disk when image is not of even 1 MB chunks.

Release 1.3.1000
WIN32 release 19 Apr 2016
- ImageUSB now supports Physical Disks instead of only volumes assigned drive letters by Windows.
This should allow disks previous not selectable to be imagable. (unformatted drives, Linux drives, etc..)
- Various GUI changes:
ListView changed to TreeView control. This changed is to allow showing of partition information for each drive.
New flashing complete dialog to indicate imaging completion and success or failure.
Running count of number of drives selected for imaging is now displayed.

Release 1.2.1006
WIN32 release 7 Oct 2015
- Addressed issue where extending partition on some NTFS drive would fail if the USB drive (preimaged) was already partitioned as max sized.

Release 1.2.1005
WIN32 release 9 Sep 2015
- Addressed issue where some drives have the same volume GUID and would cause imageUSB unable to determine disk number for the UFD.

Release 1.2.1004
WIN32 release 29 Jul 2015
- Addressed issue during image creation where imageUSB will error out before finishing the image for certain drive.

Release 1.2.1003
WIN32 release 30 Mar 2015
-Format will add an MBR at sector 0 and partition entry table will point to the partition that was formatted.
-Updated Format progress bar to stop and reset when completed.

Release 1.2.1002
WIN32 release 24 Mar 2015
-Updated and added various Text/Strings to be more relevant to the action being performed.
-Added speed in status. Speed is typically govern by the slowest IO (e.g. write). Speed displayed is the
average for the entire process.
-Increased visible GUI log size

Release 1.2.1001
WIN32 release 23 Mar 2015
-Fixed crash when creating Image with Post Image Verification enabled.

Release 1.2.1000
WIN32 release 20 Mar 2015
-Fixed issue when Zeroing GPT formatted drives. Will not correctly zero MBR and Primary GPT and Secondary GPT.
-New Zero behavior. Zeroing will wipe entire drive (write 0x00 to the whole drive).
-Added option to extend partition when writing image. Only supported for single partition images with NTFS filesystem.
-Reformat option will Zero the drive (boot sector only) and reclaim any disk space and format the volume with NTFS filesystem. Requires Vista or later.

Release 1.1.1015
WIN32 release 26 Jun 2014
-Fixed issue when Zeroing GPT formatted drives. Will not correctly zero MBR and Primary GPT and Secondary GPT.

Release 1.1.1014
WIN32 release 16 Dec 2013
-Option to Zero the Master Boot Record. This will allow Windows to see the full size of the drive after reinserting. Windows should
automatically prompt to format unrecognized drive.
-New warning message if you try to write an image located on any of the drives selected as destination drives.

Release 1.1.1013
WIN32 release 16 Oct 2013
-Verify Bug Fix
-In DebugMode, when verifying option is checked and when image is a valid imageUSB .bin file, the checksum will be calculated on
the actual image as well. Drive checksum comparison will still be against checksum stored in header.

Release 1.1.1012
WIN32 release 16 Oct 2013
- Write verification is now supported for images not created with imageUSB. A checksum will be calculated for the image and then compared to the image written on the UFD.
- Enabled UFD list while imageUSB is writing/creating images. Should allow you to scroll the list to see progress of all UFD when more than 4 drives are used.
- Source code clean up

Release 1.1.1011
WIN32 release 18 March 2013
- Added ability to select '.img' files.

Release 1.1.1010
WIN32 release 22 October 2012
-Fixed a program crash when reading fake USB drives. It seems that some USB flash drives are tricking the Windows API to incorrectly recognizing the end of the drive.

Release 1.1.1009
WIN32 release 9 July 2012
-Allows writing images larger than destination drives. End of the image will be truncated and not be written to the drive.

Release 1.1.1008
WIN32 release 19 January 2012
-Added a delay on retry for failed write attempts. Will wait 1 sec before retry.
-Address an issue where writing image would sometimes fail with Error 5: Access is Denied.

Release 1.1.1007
WIN32 release 16 November 2011
-Fixed some erroneous debug logging messages.
-Tweaked verification settings, should report which offset verification failed at.
-For Writing to flash drive, upon write failure, imageUSB will retry up to 3 times to rewrite to the failed location.

Release 1.1.1006
WIN32 release 6 October 2011
-Improved debug logging.

Release 1.1.1005
WIN32 release 6 July 2011
- Added the ability to write .ISO to USB drives. The drive must be bigger than the iso and the drive size will
be truncated to the size of the iso. To recover lost storage, use Window's Disk Management tool.

Release 1.1.1004
WIN32 release 25 January 2011
- Fixed an issue that would occur if more than one drives are being processed at once (happened sporadically).
- Added "-d" command line option that will log additional debug info
- Fixed typos

Release 1.1.1003
WIN32 release 22 December 2010
- Notification/prompt when imaging finishes.
- Option for post image verification for both creating from and writing from usb drives.
Previously, writing to drives always was verified. Verification may double the imaging
time.
- Each image created with imageUSB will have an accompanying log file written with checksum
values calculated during the creation process.
- MD5 & SHA1 checksum calculation implemented
- Now with more warning prompts! To prevent accidently destroying data.
- Simultaneous image creation is now supported. See the help documentation for naming
convention used.
- Running imageUSB with -l command line will save a log (The same one as seen at the bottom of the GUI).

Release 1.1.1002
WIN32 release 15 December 2010
- Fixed issue with overall progress bar not updating for subsequent writes after aborting.
- Cosmetic / UI changes/fixes
- Signed Executable

Release 1.1.1001
WIN32 release 8 December 2010
- Concurrent image writing to UFD.
- Asthetics Changes.

Release 1.1.1000
WIN32 release 1 December 2010
- GUI version.

Release 1.0.1001
WIN32 release 23 July 2010
- The USB Flash Drive data is now verified.

Release 1.0.1000
WIN32 release 17 June 2010
- First version.

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.3 Build 1004

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Grandalf]

ImageUSB 1.3 Build 1005

Release 1.3.1005
WIN32 release 12 Mar 2018
-Main Window is resizable vertically.
-Fixed possible write failure bug when trying to reimage a drive that may have not have a mount point assigned (i.e. drive letter) to its volumes. imageUSB would fail to properly lock/unmount volume. As seen in MemTest86 on some Windows 10 machines.

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.3 Build 1006

Release 1.3.1006
WIN32 release 13 Mar 2018

-Fixed word wrapping issue in log after resizing window.

-Should now run on WindowsXP SP3 again. Support for Windows XP may be dropped in the future.

Pobieramy na stronie:

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.4 Build 1000

Release 1.4.1000
WIN32 release 06 Nov 2018

-Extend Partition will add a new partition to fill remaining space when writing image smaller than drive if extending is not an option. New Partition will be formatted using NTFS. If more than one drive is selected in the write imaging processing. Due to likely disk signature collusion, drives may be placed offline by Windows. As such Extend or Add Partition may only work on first drive selected.

-Fixed bug where the Cancel Button on the Yes/No/Cancel Dialog Prompt before Imaging doesn't do anything. Should Now correctly cancel operation.

-Up total drive limit to 50 drives. All drives connected to computer (irregardless if they are USB drives) are counted toward this total. Note: We have never tested this many drives at once.

-Dropped support for Windows XP, minimum OS supported is now Windows Vista.

Pobieramy na stronie:

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[alco]

ImageUSB v1.4.101

WIN32 release 11 Feb 2019
Fixed issue with failure with overwriting BitLocked drives. imageUSB will now use VDS to force format the BitLocked volume before proceeding with writing the image.
-Fixed several possible crashes related to writing to log file.

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[alco]

Release 1.4.1002

WIN32 release 21 Feb 2019
-Fixed bug where the software was incorrectly reporting/trying to clear the BitLocker status of the drive when detection failed.

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.4 Build 1003

Release 1.4.1003

WIN32 release 16 Apr 2019

-Fixed bug where formmatting as NTFS may cause imageUSB to crash.

-Fixed bug where formattting as FAT32 for smaller drive would fail.

-Added imaging precheck for desintation freespace and allowed max file size for destination filesystem when creating image.

Pobieramy na stronie:

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[alco]

Release 1.5.1000

WIN32 release 25 Oct 2019
-Support for extraction the contents of the ISO image.
EXPERIMENTAL - Software will try to detect if ISO image is bootable and if so write appropriate bootloader. As of release only booting through UEFI seems to be working. Tested with Windows 10 ISO, Linux (Porteus-5.0rc, Ubuntu-19.04 and Mint 19.2 ISO images). NOT ALL ISO IMAGES WILL WORK. This functionality is experimental and may be removed from software at any time.
Log moved into it's own Window to allow for larger visible USB Drive List.

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Grandalf]

Release 1.5.1001

Version 1.5.1001 release 20 Nov 2019

-Fixed a bug where images created with V1.5.1000 had incorrect imageUSB header and was not being
subsequently recognized by imageUSB. If using other imaging tools, specify an offset of 512 bytes
to skip the header.

Pobieranie:

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.5 Build 1002

WIN32 release 24 Aug 2020

-Detected bootable ISOs will have their primary partition marked active.

-Fixed bug where the progress bar would rollover and show incorrect progress on writing ISOs over 4GB.

-When writing ISOs, user can now select either FAT32 or NTFS. If file within ISO is greater than 4GB, NTFS will be used irregardless of selection.

Pobieramy na stronie:

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.5 Build 1003

WIN32 release 25 Sep 2020
-Fixed bug where user is unable to select a read-only file for writing to UFD.

Pobieramy na stronie:

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.5.1006.0

WIN32 release 29 Nov 2023

-Added some debugging messages during Write image routine

Pobieramy na stronie:

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

ImageUSB 1.5 Build 1007​

Apr 15, 2025

• Fixed a bug when writing ISO files to USB drives that incorrectly identified themselves as fixed drives instead of removable drives. (Kingston Type-C 256GB+ was the only known drive with this issue).

Pobieramy na stronie:

Zaloguj lub Zarejestruj się aby zobaczyć!