MEMTEST86/86+

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 7.2
Version 7.2 13/Dec/2016

Fixes/Enhancements

Language support for Italian
Added ECC detection support for Broadwell-H chipsets
Added ECC injection support for Broadwell-H chipsets
Added ECC detection support for AMD Merlin Falcon
Added fix for certain Intel Xeon E5 platforms that are unable to access the ECC and SMBus registers
TSOD polling is now temporarily disabled on Intel E5 v3 platforms when reading SPD bytes. Previously, this caused invalid bytes to appear in the SPD data.
Added sanity check for invalid characters in the SPD part number string
Updated JEDEC ID manufacture names
Fixed crash when the number of processors is greater than the max supported (120)
Added SMBIOS system, baseboard and BIOS info to MemTest86 reports
Reduced the number of decimal points when displaying memory/cache speeds
Added workaround for certain UEFI firmware when setting console resolution
Report file name is now prepended with the baseboard serial number when running MemTest86 Site Edition in order to distinguish from reports from other machines
Added "Mac-F42C88C8" to a blacklist of known unsupported baseboard/EFI firmwares. When a blacklisted baseboard/EFI firmware is detected, a warning message is displayed.
Updated to latest UDK + compiler tools
Various system info related updates/fixes (CPU)
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Zaloguj lub Zarejestruj się aby zobaczyć!


Version 7.3 27/Feb/2017


Fixes/Enhancements
  • CPU cores that are identified as hyperthreads are now disabled by default, due to minimal performance benefits
  • Fixed potential system hang caused by memory alignment issues when allocating 128-bit variables on the stack during the 128-bit random number sequence test (Test 12)
  • Improved performance of the 128-bit random number sequence test (Test 12) by using SSE2 comparison intrinsics
  • Improved performance of the row hammer test (Test 13) by increasing the default step size to 0x1000000 (16MB) for subsequent passes after the first pass. On the first pass, the default step size is 0x4000000 (64MB)
  • Reduced test time of the row hammer test (Test 13) by using only a single offset bit to determine the row address pair, rather than cycle through all possible offset bits.
  • Added 'ENABLEHT' config file parameter to enable/disable CPU cores identified as hyperthreads
  • Added 'HAMMERSTEP' config file parameter to specify the step size for the next row pair to hammer in the row hammer test (Test 13). Increasing the step size reduces the memory test coverage, but will also decrease the test time. By default, the step size is 0x1000000 (16MB)
  • Added several known baseboards to to a 'blacklist' of boards that have known issues when running in multiprocessor mode. If a blacklisted baseboard is detected, the Multiprocessor test is skipped during startup and the CPU selection mode is set to single.
  • Fixed triggering of ECC error injection on Intel Skylake (Xeon E3 v5) chipset
  • Added ECC detection and injection support for Intel KabyLake (Xeon E3 v6 family) chipsets
  • Added ECC detection and injection support for Apollo Lake SoC (Atom E3900 Series) chipsets
  • Added support for retrieving RAM SPD data on Intel Skylake-E chipsets
  • Fixed issue with the test elapsed time having strange values when running in round robin or sequential CPU mode due to the timestamp counter not being synchronized on the CPU cores
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 7.4
Version 7.4 26/July/2017


Fixes/Enhancements
  • Added new file blacklist.cfg that contains a list of baseboards that have known MemTest86 boot issues
  • Added 'CONSOLEMODE' config file parameter for specifying the mode of the UEFI console. Setting the console mode determines the resolution of the console (with 0 being the minimum supported resolution of 80x25)
  • Added 'BITFADESECS' config file parameter for specifying the sleep interval in the Bit Fade test (Test 10)
  • Added language support for Catalan
  • Updated ImageUSB to version 1.3
  • Fixed 128-byte alignment issues in the random library
  • Errors detected in Test 12 (128-bit Random Number Sequence Test) are now logged as 128-bit values
  • HTML test report now includes if ECC polling was enabled
  • Fixed text artifacts appearing in the testing screen due to the text being too long
  • Fixed memory size being incorrectly reported due to including non-RAM memory ranges (eg. NVM, MMIO, Reserved)
  • Fixed main menu screen being too small due to resolution being set too high
  • Added preliminary ECC Injection support for Intel Xeon E5 chipsets
  • Added preliminary ECC Injection support for Intel D-1500 chipsets
  • Added ECC detection support for different variations of Intel Kaby Lake chipset
  • Added support for retrieving AMD Ryzen CPU info, including base and turbo clock speeds
  • Improved the performance and robustness of measuring CPU base/turbo speeds for AMD chipsets
  • Updated JEDEC RAM manufacturer ID list
  • Added reset mechanism for Intel ICH SMBus when timeout occurs while accessing SPD registers
  • Fixed DDR4 SPD data not being read for PIIX4 SMBus controllers
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 7.5
Version 7.5 5/Feb/2018


Fixes/Enhancements
  • Added check for whether the number of errors exceed a maximum error count. If so, the tests are aborted. This can be configured via the configuration file parameter MAXERRCOUNT. By default the value is 10000
  • Added support for Russian language
  • Added new configuration file parameter EXITMODE for specifying whether to shutdown or reboot the system on exit
  • Added support for reporting to Management Console (
    Zaloguj lub Zarejestruj się aby zobaczyć!
    ) via XML messages over TFTP (Site Edition only). The status of MemTest86 is periodically reported to the management console
  • Added new configuration file parameter TFTPSERVERIP for specifying a different TFTP server IP address for sending report files and reporting to the management console (Site Edition only)
  • Added workaround for retrieving configuration files from TFTP servers that don't support the 'get file size' TFTP command (Site Edition only)
  • Added workaround for Serva bug when overwriting a file on the TFTP server (Site Edition only)
  • Fixed bug with generated HTML/XML files that require character escaping
  • Added workaround when firmware EFI_GET_TIME function fails to retrieve the time correctly. A warning is also written to the log file
  • Added new flag DISABLE_CONCTRL to blacklist for console control workarounds for older firmware
  • Fixed 'ALL' BIOS versions not being parsed properly in blacklist
  • Updated blacklist.cfg file with additional baseboards with known issues
  • Added more robust detection of CPU hyperthreads
  • Added ECC detection support for Intel Skylake-SP chipsets
  • Added ECC detection/injection support for AMD Ryzen chipsets
  • Added warning message to log file when ECC injection is locked on Atom C2000 chipsets
  • Fixed bug with ECC error reporting on Intel Xeon E3 chipsets
  • Fixed CPU temperature not being shown for Intel Apollo Lake, Skylake-X and Broadwell-E chipsets
  • Added preliminary support for retrieving CPU info for Intel Cannon Lake/Knights Mill chipsets
  • Fixed bug with retrieving the number of boosted P-states in AMD chipsets
  • Fixed CPU temperature not being read properly on AMD 15h (model >= 40h) chipsets
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
MemTest86 8.0 Build 1000
Version 8.0 7/Dec/2018


New Features
  • Added ability to save/overwrite current configuration to the mt86.cfg file. This can be done under the 'Settings' screen
  • Initial support for KingTiger iMS functionality. In the medium term, this will allow bad RAM addresses to be localized and removed from service, possibly fixing memory errors caused by defective RAM sticks
  • Added language support for Polish
  • Added new configuration file parameter CONSOLEONLY which forces MemTest86 to run using the console only (ie. no graphics). This allows for systems without graphics support (eg. serial console)
  • Added new configuration file parameter SAMESPDPARTNO to check whether the part numbers of all detected SPDs match
  • Added new configuration file parameter EXACTSPDS to specify the number of detected SPD modules to match before allowing the tests to begin. This parameter overrides MINSPDS if set.
  • Added options to set MINSPDS and EXACTSPDS in the main menu. This can be done by selecting 'View detailed RAM (SPD) info' in the 'System Info' screen
  • Improved Test 12 test coverage by alternating between temporal/non-temporal store/load intrinsics. This change allow MemTest86 to detect some previously undetectable RAM errors.
  • Added support for memory error triggering and logging for logic analyzers such as Logic Analyzer Keysight U4164A. Before the test is started, the memory address of the structure where errors are logged is displayed on screen to allow for configuration of the logic analyzer. When memory errors are detected, the pattern 0xDEADBEEF and error details are written to a predefined structure. This triggering/logging mechanism is enabled via configuration file parameter TRIGGERONERR.
Fixes/Enhancements
  • Removed MemTest86 v4 (BIOS) from boot images. This means that MemTest86 will no longer be dual boot and UEFI is now mandatory to use new versions of MemTest86. On old machines with traditional BIOS, the separate stand alone V4 release will need to be used. This change was made as many users were confused by the dual boot setup, and accidentally booted the old V4 release on new UEFI systems.
  • Removed MemTest86 ISO download packages. Users are encouraged to use the USB boot images which allow logs, reports and configuration files to be written to the USB drive. If CD boot is required, please use ISO images from MemTest86 v7 or earlier.
  • Consolidated download packages for Windows and Linux/Mac into one zip file
  • Increased size of partitions in the boot images to 256MB
  • Fixes to allow Memtest86 to be installed permanently in firmware by motherboard vendors
  • Fixed system hang when disabling cache on CPU threads
  • Memory ranges less than 1MB are no longer reserved for Bit fade test/Hammer test due to possible memory conflict issues
  • (Site Edition only) Changed management console report period from 3 min to 1 min. Removed reporting after the completion of every test.
  • Added periodic resetting of watchdog timer for iPXE workaround
  • Limited the maximum number of passes in the Free version to 4
  • Fixed FAIL result in generated HTML report when testing was aborted without any errors.
  • Added timestamp to the list of errors in the HTML report
  • Fixed misaligned progress bar when running RAM benchmark test
  • Updated to UDK2018
  • Added CPU/SPD/ECC support for Hygon Dhyana chipsets
  • Updated JEDEC RAM manufacture ID list (JEP106AX)
  • Added SMBus (SPD) support for Intel Cannon Lake SMBus.
  • Added SMBus (SPD) support for unknown Intel SMBuses
  • Added ECC detection support for Intel Atom C3000 chipsets
  • Added ECC detection and injection support for Intel Coffee Lake chipsets
  • Added ECC detection and injection support for AMD Ryzen (10h-1fh) chipsets
  • Fixed ECC detection support for Skylake-SP
  • Fixed ECC error channel/slot number determination for Skylake-SP
  • Fixed bug in reporting of ECC capabilities for Ryzen chipsets
  • Fixed Ryzen CPU temperature readings for 26xx/27xx/29xx
  • Added workaround for console mode not working for laptops with hi-res screens
  • Added iMac14,2 to blacklist which set the lower address limit to 0x1000 by default
  • Added ROG STRIX X370-F GAMING (BIOS version 4012) to the blacklist as first BIOS version that doesn't require blacklisting
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 8.1
Version 8.1 4/Jan/2019


Fixes/Enhancements
  • Added version information and total CPU threads to test summary screen
  • Increased maximum number of CPU threads to 256
  • Added text colour to error messages during testing
  • Added Mac Mini 2018 to blacklist which sets the lower address limit to 0x1000 by default
  • Fixed bug in detection of hyperthreads when the number of CPU threads exceeds the maximum
  • Fixed incorrect JEDEC manufacture names (Bank 10)
  • Fixed missing RAM part number / serial number obtained from SMBIOS in HTML report
  • Fixed incorrect channel/slot number for ECC errors on Skylake-SP chipsets
  • Fixed bug in specifying the number of test passes for Free version
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 8.2
Version 8.2 3/Jun/2019


Fixes/Enhancements
  • Added REPORTPREFIX configuration file parameter to specify the prefix text to use for the report files
  • Added TEST12_SINGLECPU flag to blacklist.cfg to force test 12 to run in single CPU mode as a workaround for CPU threads hanging in PARALLEL mode
  • Added DISABLE_LANG flag to blacklist.cfg to disable language support and font support, which is known to cause issues on some Dell systems
  • Changed the blacklist.cfg RESTRICT_ADDR flag lower address limit from 0x1000 to 0x100000, as some systems experience issues when writing to the BIOS area (up to 0xFFFFF)
  • Fixed bug with blacklist.cfg RESTRICT_ADDR flag not setting the lower address limit properly
  • Fixed buffer overrun bugs detected by HeapGuard when measuring memory latency
  • Fixed fluctuations in memory/cache speed measurements
  • Fixed UI issues with System Information screen
  • Changed "red" error text to "light red" for better readability
  • Fixed CPU temperature readings for several AMD Ryzen chipsets
  • Added reporting of Module Manufacturer's Specific Data in DDR4 SPD modules to PXE server for use with Management Console (Site Edition only)
  • Fixed timing issues with retrieving SPD data on Skylake-X chipset
  • Fixed decoding of DDR4 SPD Post Package Repair (PPR) (Byte 9)
  • Fixed decoding of DDR4 SPD Secondary SDRAM Package Type (Byte 10)
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 8.3
Version 8.3 22/Nov/2019


Fixes/Enhancements
  • Added AUTOREPORT configuration file parameter to enable/disable automatic saving of test results HTML report when AUTOMODE is enabled
  • Added TFTPSTATUSSECS configuration file parameter to set the period to send status XML updates to TFTP server (for management console)
  • Modified behaviour for detection of duplicate errors. Errors with the same address (and bits) but occur in different tests are no longer considered to be duplicate.
  • Fixed hang when CPU does not support SSE4.1 instructions when running Test 12
  • Fixed MINSPDS and EXACTSPDS configuration file parameters being incorrectly set when saving current configuration settings to file
  • Fixed escaping of characters in XML messages to TFTP server (for management console)
  • Fixed invalid XML tag in XML messages to TFTP server (for management console)
  • Report is now automatically saved before the end of test prompt when AUTOMODE=2 is set in configuration file
  • Fixed incorrect reference to blacklist flag 'TEST12_ONECPU' (correct flag is 'TEST12_SINGLECPU')
  • Updated Russian translations (courtesy of Victor Lutz)
  • Added better sanity checking for SPD bytes
  • Updated JEDEC manufacture list to JEP106AZ (May 2019)
  • Fixed channel mapping for Apollo Lake ECC detection
  • Fixed ECC detection for certain Intel Skylake-SP chipsets
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 8.4
What's new in Memtest86 8.4
April 10, 2020
  • Fixes/Enhancements:
  • Added new config file parameter 'SPDMATCH'. If enabled, will look for SPD.spd file which contains the raw bytes to compare SPD bytes to
  • Memory is now reserved at the beginning and released at the end of the test session to reduce frequency of memory allocations/release and improve UI responsiveness
  • Added fallback when failing to set the menu screen size to the max supported resolution
  • Added tftp.remap file for fixing backslash/forward slash issues with uploading XML files when running TFTP server on Linux machines
  • Added warning message when failing to inject ECC errors for Ryzen chipsets (due to being disabled in production)
  • Added specific Mac Pro models to black list to workaround display and multiprocessing issues
  • Added preliminary ECC support for Ryzen Zen 2
  • Added preliminary support for retrieving CPU info for Intel Comet Lake chipsets
CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 9.0
February 10, 2021
  • New Features:
  • Support UEFI-based ARM systems (arm64/aarch64), including memory test algorithms ported to ARM64 and optimized using hand-written assembly code. Special thanks to Simula eX³ project (ex3.simula.no) for providing high-end ARM64 systems for testing.
  • Added BADRAM & badmemorylist formatted strings and instructions in the exported HTML report to mask defective memory addresses (Pro only)
  • Revamped RAM SPD screen in the Main Menu with graphical view of all RAM slots
  • Added preliminary support for DIMM temperature reporting (when supported by DIMM)
  • Added option to change save location of logs/reports to another disk volume (file system)
  • Added prompt on various exit options (shutdown, reboot, exit to BIOS) on application exit.
  • Added keyboard shortcut (F12) to save screenshot to file within the Main Menu
  • Support for saving test results to a byte-packed, binary file for storage-limited systems
  • Support for passing configuration parameters via command line arguments
  • Added new config file parameter, 'EXACTSPDSIZE', to specify the total capacity of all detected SPD to match before allowing tests to begin
  • Added new config file parameter, 'MEMREMMB', for specifying the minimum amount of memory to leave unallocated during testing
  • Added new config file parameter, 'MINMEMRANGEMB', for specifying the minimum size of memory ranges that shall be allocated for testing
  • Added new config file parameter, 'AUTOREPORTFMT', for specifying report format of auto-saved reports
  • Added new config file parameter, 'PMPDISABLE', to disable TFTP uploading of XML messages for Management Console integration
  • Added new config file parameter, 'RTCSYNC', to sync real-time clock with PXE server (via a periodically updated 'CurrentTime.txt' served by the PXE server)
  • Added new config file parameter, 'VERBOSITY', for specifying the verbosity level of the debug output
  • Added new config file parameter, 'TPL', to specify the UEFI task priority level of the MemTest86 application
  • Fixes/Enhancements:
  • Support for per-baseboard configuration file via baseboard-prefixed filename (eg. "Surface Pro-mt86.cfg")
  • Optimized/removed stale 32-bit code in memory tests
  • Improved test coverage by alternating between ascending/descending assignment order of CPU cores between passes when running in parallel mode
  • Track CPU core/thread ID of detected memory errors, and include the list of CPUs in error in test summary/report
  • Added tracking and reporting of min/max/average CPU + DIMM temperatures (when supported by DIMM)
  • Added SMBIOS memory device info to reports
  • Modified DRAM address ECC error reporting from (Column,Row,Rank,Bank) -> (Channel,Slot,Rank,Bank,Row,Column)
  • Added serial number of DIMM module experiencing ECC errors in report (supported chipsets only)
  • Added channel/slot information of detected SPDs in report (supported chipsets only)
  • Fixed 100% CPU usage when waiting for input in main menu
  • Improved UI drawing performance for better responsiveness
  • Generate beeps of Piezo Speaker on test end (if available)
  • Changed to large, coloured PASS/FAIL message box on test end
  • Changed to large, coloured FAIL message box on failed pre-test SPD checks
  • Fixed Test 12 errors in HTML report being truncated
  • Updated blacklist to work around new UEFI bugs Apple added to their UEFI firmware
  • Updated blacklist to work around Microsoft/Huawei laptops with display issues related to screen resolution
  • Fixed crash on VirtualBox due to reading of non-existent MSRs
  • Include system information details in TestResult XML messages to PXE Server (Site Edition)
  • Display error when there is a TFTP transfer error when sending Status XML messages to PXE server (Site Edition)
  • Fixed escaping of chars to XML entities when generating messages to PXE Server (Site Edition)
  • Output additional lines to console during MemTest86 boot
  • Fixed detection of uncorrected ECC errors for AMD Ryzen chipsets
  • Fixed ECC detection for > 2 channels for AMD Ryzen chipsets
  • Fixed ECC support for multiple CPU dies for AMD Ryzen chipsets
  • Fixed ECC error detection on AMD Ryzen chipsets with multiple CPUs
  • Added preliminary support for AMD Ryzen ECC reporting via error count registers when PFEH is enabled
  • Fixed ECC detection for Intel chipsets that use error count registers
  • Added ECC support for different Intel Coffee Lake chipset variants
  • Added disabling of SMI for Intel Kaby Lake chipsets to allow ECC errors to be detected
  • Added ECC support for Intel Comet Lake chipsets
  • Added preliminary support for decoding of system address to socket/channel/rank/bank/row/column address on Broadwell-DE. This information is logged in the log file.
  • Fixed incorrect reporting of ECC capabilities for chipsets with multiple IMCs
  • Added support for retrieving CPU info for Intel Gemini Lake chipsets
  • Added preliminary support for retrieving CPU info for Intel Ice Lake chipsets
  • Fixed potential unstable behaviour when increasing the target multiplier for Intel Silvermont chipsets
  • Fixed enabling turbo mode on Intel Silvermont chipsets
  • Updated temperature offsets for AMD Ryzen chipsets
  • Added preliminary support for reading AMD Ryzen 5000 (Family 19h) chipset temperatures
  • Updated EDK2 library to edk2-stable202008
  • Fixed memory leak when exiting program
  • Revised Portuguese translations
  • Updated unifont.bin file with higher weight Russian glyphs
  • Removed PassMark contact information from reports


CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 9.0 Build 2000
February 24, 2021
  • Fixes/Enhancements:
  • Fixed text disappearing in the main menu for certain boards (eg. Thinkpad)
  • Fixed artifacts appearing in icons due to improper handling of transparency channel
  • Restored option to set # of passes for Free version
  • Fixed drawing issues in Upgrade to Pro screen when hovering mouse over sidebar
  • Fixed display issues in console mode for certain boards (eg. Supermicro)
  • Fixed double temperature offset being applied to certain Ryzen (AMD 17h) chipsets


CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 9.1 Build 1000
May 21, 2021
  • Fixed parsing of SMBIOS memory device structure for compatibility with DDR5 DIMM data
  • Fixed non-page aligned addresses for ADDRLIMLO/ADDRLIMHI configuration file parameters
  • Fixed hang when running in UEFI Shell caused by improper cleanup of localization strings after an exit from a previous MemTest86 run.
  • Added support for retrieving CPU info for Intel Rocket Lake chipsets
  • Added support for retrieving CPU info for Intel Tiger Lake chipsets
  • Fixed misalignment of text containing full-width characters


CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 9.2 Build 1000
July 23, 2021
  • Fixes/Enhancements:
  • Preliminary support for retrieving and decoding DDR5 SPD data. This includes support for the new SPD HUB I2C/I3C command set.
  • Support for retrieving DIMM temperatures (TSOD) for AMD Ryzen chipsets
  • Fixed ECC error polling on Ryzen with multiple controllers
  • Fixed ECC detection on AMD Ryzen chipsets (Family 17h Model 31h)
  • Improved formatting of the Test Summary screen on test completion
  • Moved "RAM Temp" to "Pattern" line to allow longer RAM info display
  • Updated blacklist with additional baseboards with known multiprocessing issues
  • Refactored code for newer EFI Development Kit (EDK II) release compatibility


CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 9.2 Build 2000
July 30, 2021
  • Fixes/Enhancements:
  • Added large PASS/FAIL block text to top-right corner of HTML report
  • Added visual representation of bit error mask to HTML report
  • Fixed missing timestamp for ECC errors in HTML report
  • Fixed incorrect version string indicating "V9.1" instead of "V9.2"


CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
37251
Reakcje/Polubienia
33664
Memtest86 9.3 Build 1000
October 6, 2021
  • Fixes/Enhancements:
  • Support custom test definitions specified by a configuration file. A custom test definition consists of an existing test algorithm, specific test pattern, cache settings, and number of iterations. Custom test definitions are enabled by specifying the TESTCFGFILE parameter (Pro Edition only)
  • Fixed incorrectly formatted XML Status/TestResult files sent to PXE/TFTP server (Site Edition only)
  • Fixed incorrect reporting of error endianess for 128-bit test
  • Fixed bug in displaying/logging ECC error channel/slot number
  • Fixed report/log files not being saved correctly for non-standard USB flash drive installs
  • Improved responsiveness of pattern string updated on screen
  • Display row hammer warning, if applicable, in test completion popup message
  • Fixed ECC error reporting on AMD Ryzen chipsets to include channel/slot information
  • Fixed ECC error reporting on AMD Ryzen chipsets with 8 memory channels
  • Improved robustness of ECC error reporting for Intel Atom C2000 chipsets
  • Fixed retrieval of DDR4 SPD bytes on Intel Alder Lake chipsets
  • Added support for parsing DDR3 Module Manufacturer’s Specific Data
  • Updated blacklist with additional Surface Pro models with display issues


CD:
Zaloguj lub Zarejestruj się aby zobaczyć!

USB:
Zaloguj lub Zarejestruj się aby zobaczyć!
 
Do góry