TARGET

[Camel1965]

TARGET 3001 32.2.0.54​

October 6, 2023

• Search and select: Fixed problem caused by upper and lower case entry
• Importing REF symbols sometimes pushed the TARGET window into the background
• Component names and values from UltraLibrarian sometimes have a width of almost zero: Now automatically corrected
• The layers in the PCB can now have any RGB color, not only the 16 basic colors as before

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.2.0.70​

October 19, 2023

• Search and select: Fixed problem caused by upper and lower case entry
• Loading and saving the new RGB colors in the layer dialog did not work always
• PDF output sometimes had small prongs on ground planes that could cause short circuits
• In the back view of the board, the colors of the layers were not always taken along correctly
• The CALAY netlist format no longer has a length restriction for the signal names
• An oblong drill hole was output in STEP by mistake only if it was more than twice as long as its width
• Somtimes the buttons vanished in the dialogs or in the sidebar
• "Prepare assembly" can ignore the component type when summarizing identical components

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.2.0.72​

October 19, 2023

• Search and select: Fixed problem caused by upper and lower case entry

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.2.0.96​

January 3, 2024

• Eagle import: The reference layers in the layer dialog were sometimes assigned incorrectly
• Big layers dialog: Using the buttons for multilayer PCBs sometimes set all colors to black
• When moving a pin name in the schematic, a line is drawn towards the respective pin
• "Miter corner" and similar functions of the small black boxes: The color is inherited too
• Coordinates beyond +/- 1 meter: "Shift PCB into the center" did not work correctly
• Update or replace a component: If the package is not replaced too, USED_PACKAGE and USED_PACKAGE_ID will remain
• Front panels: Faces in the engraving layer (triangles, rectangles and slices) are combined and outlined

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.3.0.35​

February 2, 2024

• Added component properties explorer: Edit all component properties in a clearly arranged table

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001! 32.3.0.50

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.4.0.5​

Mar 26, 2024

• Interactive meandering: Length information at the cursor was not always calculated correctly
• ODB++: Component names and values top/bottom on extra layers are also output in the silkscreen
• Signal polygons: "Adjust auras" only affects pads whose center is not inside another polygon with a higher rank
• BOM script: Added commands SMD, THT and NoPackage
• Defective components in the database could sometimes not be selected and deleted
• Export and import modules: The IDs of the components are included
• In the Panel Pool Calculator, an error message occurred under very special circumstances
• Color dialog: Added the Hex RGB entry to the exisiting BGR entry

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.4.0.23​

Apr 11, 2024

• SMD pad with drill hole: At least the drill hole is left blank in foreign signal polygons on all layers
• Old ground planes from before V18 were not always output
• Sometimes "align right" for texts was ignored

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.4.0.55​

Apr 24, 2024

• ODB++: The position of packages with "Locked against movement" was sometimes wrong
• ODB++: QR codes in rectangles were not output correctly
• ODB++ via commandline call with "-o": Sometimes "align right" for texts was ignored
• Import Eagle libraries: SMD pads sometimes were not assigned to the correct layer
• Component browser: Very big rectangles and triangles are not shown opaque in the component preview
• ODB++: Empty texts without content sometimes caused an error message
• Printing inverted: Elements with non-standard colors sometimes were not inverted

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.4.0.71​

May 15, 2024

• Creating a front panel with height more than 1 m could cause problems
• XGerber output: Assembly files BOM and CPL are also exported e.g. for JLCPCB (Preview V33)
• Pick&Place: Coordinates extended to 3 decimal places
• Interactive Bill-Of-Material iBOM: Pads did not always show the correct rotation
• Eagle import *.SCH: Additional texts (attibutes) were not correctly mounted into the data structure
• Fine-tuning tracks with [7]: Not all minimum distances of the signals were regarded

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.6.0.13​

Jul 11, 2024

• "Angle dimensioning" in menu "Aktions" (Preview V33)
• For Z3001 files, no Z3001OPEN file is generated any longer
• Perfboard area: Vias are set to "always free of solder resist", regardless of the Gerber settings

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.6.0.21​

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.6.0.34​

Aug 5, 2024

• ODB++: SMD pads with an own drill hole were not always output as drill hole
• PCB outline wizard: For round holes, the diameter is now specified instead of the radius
• ASCII IO import/export can cope with oblong holes in pads and with "No aura for layers"
• Block diagram repaired: All terminals had the pin number 1. Reo fixes this for old projects
• ODB++: Pins with pin number 0 are not output to the component layers
• ODB++ output, saving the project file and outputting ODB++ again could sometimes cause problems
• ODB++: The subnet information was sometimes missing in the file ".stepspcbedadata"
• The colors of the grid $808080 (dark gray) and $E0E0E0 (light gray) were sometimes reset to [Standard]
• XGerber import: Select several XGerber files and a drill file at once or a ZIP with such files
• XGerber import: "%" in a comment "G04" could disrupt the parser

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001! 32.6.0.54

Aug 20, 2024

• QR codes are also generated correctly when the PCB is viewed from the rear. Subsequent rotating remains prohibited
• ToolTip also shows the layer of the elements in PCB view
• Clearer message if STEP models are missing when loading a project
• Corrected the size of the drill hole pictograms in the new settings dialog
• Improved the position of dialogs and toast messages if more than one monitor is used
• ODB++: Slices and 360° circles (tori) in the drilling layer are also output as drill holes

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[Camel1965]

TARGET 3001 32.7.0.39​

Sep 19, 2024

• Better finding: After searching and highlighting, the found elements are framed with "marching ants" lines
• Improved the PDF output via script
• Hold [Shift] or [Ctrl] for exact angles during mouse movement (45° grid, also for signal polygons, Preview V33)
• 3D view: The color of the PCB and of the silkscreen can be set in the context menu (M2)
• Pick&Place: The board dimensions are output when outputting in text format, width, height, thickness
• Variants: When deriving components from an example component, the marked components are preselected
• Drill output with XGerber: Improvement, IF NPT drills are not output into an extra file (Non-Plated-Through)
• Pick&Place as Excel: Component selection did not work correctly
• Output of a list of points for an automatic adhesive dispenser as CSV or Excel file (Preview V33)
• Color of air wires for new projects with dark background RGB $41FF41 and with light background RGB $008000
• Pick&Place: Referencepoint of a package can also be pad 1
• Improved pin overlapping in the schematic during symbol creation
• Interactive Bill-of-Materials iBOM: Grouping of identical components improved

Zaloguj lub Zarejestruj się aby zobaczyć!