TARGET

Jarom

Jarom

Bardzo aktywny
Zasłużony
Dołączył
23 Wrzesień 2016
Posty
3893
Reakcje/Polubienia
1230
TARGET 3001 19.5.0.26
2018-01-23: 19.5.0.19: MID: An offset occurred, if a PCB outline was on layer 23 additionally to the 3D MID body
2018-01-22: 19.5.0.19: Printing: TARGET remembers "fit to page"
2018-01-21: 19.5.0.19: Alignment assistant: Accept the package properties for "Package without schematic symbol"
2018-01-21: 19.5.0.19: Accelerated display of signal polygons on the screen
2018-01-18: 19.5.0.19: MySQL database: 3D STEP models may be bigger than 1 MB
2018-01-17: 19.5.0.19: Isolation milling via HPGL: Line's end can be CR or CRLF
2018-01-02: 19.4.0.85: Integrated a new memory manager, which significantly accelerates many actions
2017-12-26: 19.4.0.27: PCB-POOL frontpanel: Corrected price calculation for engraving with anodized aluminum blue, green and red
2017-12-21: 19.4.0.17: Schematic: Added menu point "Update old components..."
2017-12-20: 19.4.0.17: Introduced an additional viewer password
2017-12-11: 19.4.0.11: Assembly with PCB-POOL checks again for identicalness of the order numbers
2017-12-08: 19.4.0.11: Thermal pads with signal polygons: Ligaments were not created if the aura was smaller than the minimum spacing
2017-12-07: 19.4.0.11: Component browser: Improved the import of user defined parameters from CSV files
2017-12-05: 19.4.0.5: Under certain circumstances the reorganisation caused a memory overflow
2017-12-03: 19.4.0.5: Improved DXF import for Entities with a negative Z value in "Extrusion Direction"
2017-12-03: 19.4.0.5: MID view: Button left top for standard alignment shows size of MID body left side in the status bar
2017-12-02: 19.4.0.5: Symbol dialog: Added button [Datasheet]
2017-12-02: 19.4.0.5: Signal polygons: Inserted point "Entire PCB area..." in menu "Actions / Ground planes"
2017-12-02: 19.4.0.5: Signal polygons: Menu point on small black boxes: "Enter coordinates" like with key [+]
2017-11-27: 19.3.0.85: DRC: Ligaments of thermal pads could cause an unrecognized short-cut under certain circumstances
2017-11-22: 19.3.0.80: MID: Flattened and accelerated air wires
2017-11-17: 19.3.0.80: DRC: Overlapping signal polygons with equal rank could cause an unrecognized short-cut
2017-11-15: 19.3.0.80: Component browser: Extra: Generate components from CSV
2017-11-13: 19.3.0.69: Airwire dialog: Introduced field "Fill polygons always anew"
2017-11-10: 19.3.0.69: Loading a project file: Sometimes the assignment of a signal to a signal class was not remembered
Kliknij aby rozwinąć...
Zaloguj lub Zarejestruj się aby zobaczyć!
 
Grandalf

Grandalf

Bardzo aktywny
Członek Załogi
Moderator
Dołączył
26 Maj 2015
Posty
19243
Reakcje/Polubienia
56075
TARGET 3001! V20
NEW: V20:
  • Zaloguj lub Zarejestruj się aby zobaczyć!
    : When routing a new track, neighboring tracks are pushed aside, if necessary.
    Neighbors of the neighbor follow like a cascade. Spacing rules are obeyed.
  • Move vertices to the grid/add any point to the grid: Push&Shove has put some tracks out of the grid? No problem:
    Drag vertices back to the grid by adding the [Shift] key. Or you would generate additional grid points just at the spot where you are.
  • Component drag and drop from
    Zaloguj lub Zarejestruj się aby zobaczyć!
    and
    Zaloguj lub Zarejestruj się aby zobaczyć!
  • Selecting track segments: With [Shift] and [Ctrl] as usual in Windows select either "all inbetween" or just the first and last highlighted track segment.
  • Design Rule Check: The check for minimum spacings was significantly accelerated.
  • Zaloguj lub Zarejestruj się aby zobaczyć!
    : Number of air wires - A useful little feature to plan and calculate you routing activities.
Adjustments and modifications:

2020-03-25: 20.6.0.34: Creating test points had problems with signal polygons that were already filled
2020-03-24: 20.6.0.34: Filling of signal polygons under certain circumstances reduced the aura of pads
2020-03-24: 20.6.0.34: XGerber output: Triangles for filling ground planes sometimes overlapped too much
2020-03-19: 20.6.0.34: Scripts for the BOM output: "Numeric=Yes/No" for numbers as numbers in Excel (xlsx)
2020-03-18: 20.6.0.27: DXF files may start with blank lines
2020-02-28: 20.6.0.27: XGerber export: Triangles for filling ground planes overlap now (overcome an UCAMCO rendering error)
2020-02-25: 20.6.0.27: Command line -i for info: Added line "Pads" that shows the number of soldering pads on the PCB
2020-02-25: 20.6.0.27: XGerber output: One decimal place more accuracy (3.6 instead of 3.5)
2020-02-20: 20.6.0.27: Electra: Sometimes vias had no aura
2020-02-19: 20.6.0.23: Unfilled signal polygons are only selected if the area plane is switched to visible
2020-02-19: 20.6.0.23: DRC: Extra error message, if a signal polygon is filled too thin
2020-02-17: 20.6.0.21: Front panel started erroneously with schematic view
2020-02-16: 20.6.0.21: Improved PDF output, if the whole sheet is inverted
2020-02-11: 20.6.0.20: Added PCB outlien assistant to the magic wand in PCB view
2020-02-11: 20.6.0.20: Signal polygons: Also vias can be provided with thermal ligaments like thermal pads
2020-02-09: 20.6.0.20: PCB view: Component list right lower corner in the sidbar is sorted alphanumerically: R1,R2,R11,R12,R100
2020-02-07: 20.6.0.18: As of edition economy also 4-layer board as a default template for new projects
2020-02-07: 20.6.0.18: BOM and Pick&Place: Origin (0|0) left bottom of the PCB or absolute or relative Coordinates
2020-02-06: 20.6.0.18: Excellon output for front panel milling: Pre-drilling is now only optional
2020-02-02: 20.6.0.18: Check project: Improved the detection of short circuits in the schematic
2020-01-30: 20.6.0.18: Quick DRC: Star-shaped ground was ignored for the spacing cheks with signal polygons
2020-01-24: 20.6.0.4: 3D editor: Improved the editing of extruded polygons
2020-01-24: 20.6.0.4: Meanders of differential pairs can be edited and removed
2020-01-19: 20.6.0.4: Quick DRC: Under certain circumstances overlap of signal polygons with the same rank were not detected
2020-01-19: 20.6.0.4: Quick DRC: Under certain circumstances the layer of an error was not specified correctly
2020-01-16: 20.6.0.4: Background color when importing transparent PNGs and GIFs is white now instead of black
2020-01-09: 20.6.0.4: LicenseCounterFile: Computer is only removed, if the closing TARGET is the last running instance on the computer
2019-12-31: 20.5.0.73: Differential pairs can be meandered together
2019-12-17: 20.5.0.73: Added "Capped" and "Plugged" for vias in the selection assistant
2019-12-15: 20.5.0.73: Check project: Errors can be deleted manually in the error list
2019-12-15: 20.5.0.73: Front panel: Breakthroughs could wrongly be marked as "from behind" (back)
2019-12-03: 20.5.0.73: PCB-POOL calculator: TARGET uploads the project file directly (optional)
2019-11-23: 20.5.0.73: A differential pair can be routed if there are more than 2 pads on the signal (e.g. with a suppressor diode)
2019-11-15: 20.5.0.73: The layers of signal polygons were not handled correctly when moving layers up or down in the layer stack
2019-11-12: 20.5.0.73: Mirroring in PCB view also regards padstacks now
2019-11-11: 20.5.0.73: Front panel milling: Conical countersinks were not prepared by flat millings
2019-11-07: 20.5.0.73: Front panel milling: Cut-outs with an edge length < 10 mm or a surface < 9cm² are completely chipped
2019-11-04: 20.5.0.73: Signal class with length specification: Circle shows remaining length during track routing
2019-11-04: 20.5.0.73: DXF import can cope with degenerated NURB splines
2019-11-02: 20.5.0.73: In Circuit Test (ICT): Considerably improved the generator for test adapters
2019-10-31: 20.5.0.73: Automatic test points on top were not set if the board outline was created as a component
2019-10-28: 20.5.0.73: Command line, parameter -i: Text file contains more information on the project
2019-10-28: 20.5.0.73: Dual-screen operation: Numbers of Windows screens may be wildly mixed
2019-10-24: 20.5.0.73: DRC: Quick checking may have reported spacing errors, despite of star-shaped ground
2019-10-23: 20.5.0.73: DRC: Quick checking may have showed errors with padstacks that were no real errors
2019-10-11: 20.5.0.23: Improved the dragging of the corners of polygons
2019-10-11: 20.5.0.23: Eagle export could cause double pin names in the schematic
2019-10-10: 20.5.0.23: DXF import: Comment lines (999) at the very beginning of the DXF file could cause problems
2019-10-04: 20.5.0.22: Signal polygons: Thermal ligaments are at least as wide as the filling width and at most double as wide
2019-10-04: 20.5.0.22: Signal polygons: Thermal ligaments for SMDs are max 2/3 of the thin side
2019-10-04: 20.5.0.22: Signal polygons: Thermal ligaments for drilled pads are max 2/3 of the drill hole
2019-09-24: 20.5.0.16: Eagle import: "&ndash;" in XML caused problems and is now replaced by "-"
2019-09-18: 20.5.0.8: Variant chosen for Pick&PLace does not affect the variant shown in the schematic
2019-09-18: 20.5.0.8: Cross probe did not work in all cases
2019-09-13: 20.5.0.8: Change package, Assign symbol: Selection box, if component name comes from schematic symbol or name of PCB package
2019-09-10: 20.5.0.8: Signal polygons: The ligaments of thermal pads could be created too thin in certain cases
2019-09-10: 20.5.0.8: OpenGL: The opacity for "Colormix" can be adjusted for transparent layers
2019-09-06: 20.5.0.8: 3D view regards variant components: assembled / unassembled, different values
2019-09-05: 20.4.0.87: Component exchange: The fonts for importing components are used (see Settings/INI)
2019-09-04: 20.4.0.87: Componiverse: Components with several pins stacked in the same location were not uploaded sometimes
2019-08-28: 20.4.0.81: PDF output: Mirrored right-aligned texts may have been displaced
2019-08-23: 20.4.0.75: PANEL-POOL accessories: The name of the accessory part from the eStore is displayed
2019-08-21: 20.4.0.70: Import Eagle libraries: Improved the layer assignment
2019-08-21: 20.4.0.70: Eagle import: Tracks on layer "Pads" caused problems
2019-08-21: 20.4.0.70: XGerber output: Replaced the deprecated %IN...*% (Image Name) by G04...* (comment)
2019-08-21: 20.4.0.70: Signal polygons: Thermal ligaments are max. 2/3 of the thin side of the pad but min. the filling width
2019-08-21: 20.4.0.70: Signal polygons: Thermals are also created if the pad aura is smaller than the minimum spacing
2019-08-20: 20.4.0.67: BOM: Combining identical parts and outputting rotation, position and side are mutually exclusive
2019-08-20: 20.4.0.67: DRC: Improved the quick checking and set it as default
2019-08-15: 20.4.0.67: Two components can be declared as connected to avoid airwires - e.g. 2 connectors by a cable
2019-08-15: 20.4.0.67: Excel output: Fields with numbers are also formatted as numbers (e.g. for a BOM)
2019-08-10: 20.4.0.67: DRC: When the computation of airwires was switched off, unrouted signals were not always reported
2019-07-29: 20.4.0.46: Computation of airwires with overlapping signal polygons of the same signal sometimes caused problems
2019-07-26: 20.4.0.46: TIFF files can also be created using a print script
2019-07-25: 20.4.0.46: When ordering a front panel from Beta-LAYOUT, accessories from their eStore can also be ordered
2019-07-19: 20.4.0.46: When opening a project file also backups and autosaves show up directly. E.g.: *.BK1 and *.T3001A
2019-07-18: 20.4.0.41: Improved deriving of polygonal pads
2019-07-14: 20.4.0.41: Dual screen display: Status bar shows under the active window
2019-06-12: 20.4.0.18: Program launch with double click on a project file: Position of the sidebar sliders was not remembered
2019-06-12: 20.4.0.18: Filling complex signal polygons could cause "Out-Of-Memory"
2019-06-09: 20.4.0.18: The coordinates unit of a window for editing a symbol depends on the previously open schematic window
2019-06-03: 20.4.0.18: Printing and PDF scripts: Introduced "QUIET" (suppress several unimportant messages)
2019-05-22: 20.3.0.100: Harmonization in highlighting of unrouted signals and the calculation of airwires
2019-05-22: 20.3.0.100: Signal polygons: Improved computation of thermal pads and airwires
2019-05-22: 20.3.0.100: During printing several graphical elements were erroneously enlarged slightly
2019-05-14: 20.3.0.92: Push&Shove: Improved graphics when pushing tracks
2019-05-04: 20.3.0.92: Insulation milling: Too much was milled away around the outline of signal polygons
2019-04-17: 20.3.0.52: Signal polygons: Improved the connection with thermal pad ligaments for skew pads
2019-04-16: 20.3.0.47: Menu Point "Settings / Project signals / Signal name / Properties"
2019-04-16: 20.3.0.47: PovRay: Single texta in the silkscreen were sometimes omitted
2019-04-11: 20.3.0.44: Thick tracks have attracted new segments so much during their placemant that those were not placed at all
2019-04-11: 20.3.0.44: Pads centers, that are located somewhere inside a thick track, are regarded as connected
2019-04-05: 20.3.0.44: Electra interface can handle auras as minimum spacings or not
2019-03-27: 20.3.0.44: Signal polygon: An element is considered connected when its center point touches the filled polygon
2019-03-24: 20.3.0.44: Added a confirm message before deleting many elements
2019-03-22: 20.3.0.44: Added a message before a PCB order if unfilled signal polygons can be found
2019-03-22: 20.3.0.44: Elements without signal now alwas have an aura of 0.15 mm min. if they are on a copper layer
2019-03-21: 20.3.0.44: Improved Pick&Place, if the PCB was panelized
2019-03-20: 20.3.0.44: Accelerated and improved the XGerber output
2019-03-20: 20.3.0.44: Front panel: Chamfer on outer contour possible
2019-03-20: 20.3.0.44: Insulation milling: Added SVG as format for laser plotters
2019-03-20: 20.3.0.44: DRC: Improved the check for too narrow slot holes
2019-03-19: 20.3.0.44: Signal polygons: With "Adjust auras" also component pads without pin number can become thermal pads
2019-03-13: 20.3.0.27: Insulation milling: Move up and then to center before tool change
2019-03-13: 20.3.0.27: Insulation milling: Engraved texts in copper layers were milled away again with RubOut
2019-03-09: 20.3.0.22: Measuring: Measure is shown as cursor hint
2019-03-07: 20.3.0.4: An error could occur during copying if polygons were present in a concerned signal
2019-03-07: 20.3.0.4: DRC: Violet airwires in the schematic could cause short-circuit error messages
2019-03-05: 20.2.0.97: Accelerated the placement assistant enormously
2019-03-04: 20.2.0.97: Insulation milling: Optimized the paths during insulation
2019-03-02: 20.2.0.97: Remove a signal from a signal class: The minimum width and spacing are reset to the standard values
2019-03-01: 20.2.0.97: Electra interface can handle differential pairs
2019-03-01: 20.2.0.97: Element to the front / into the background works with polygons
2019-02-28: 20.2.0.86: Groundplane separation works with the new signal polygons now
2019-02-28: 20.2.0.86: Insulation milling: Fixed problem with RubOut
2019-02-26: 20.2.0.86: XGerber output: Addition and reduction of solder paste and solder stop mask also work with polygonal Pads
2019-02-25: 20.2.0.86: GenCAD can export packages also without FLIP in the SHAPE call
2019-02-20: 20.2.0.72: A problem filling signal polygons was fixed
2019-02-20: 20.2.0.72: Handle crosses for symbols and packages must be set with an M1 click
2019-02-20: 20.2.0.72: Pressed middle mouse button (mouse wheel) moves the sheet
2019-02-19: 20.2.0.72: Insulation milling completely revised: RubOut new and PCB outline with automatic radius correction
2019-02-12: 20.2.0.57: Panelisation: Turnover panel had sometimes problems with padstacks
2019-02-12: 20.2.0.57: Vias are handed over to Electra with better size adjustment
2019-02-03: 20.2.0.57: Sometimes the component browser hid behind the main window and blocked everything
2019-02-02: 20.2.0.57: Excange component: Component can no longer get ripped up
2019-01-30: 20.2.0.39: DXF import: Unexpected group codes could lead to errors
2019-01-29: 20.2.0.39: Percentage reduction of solder paste also works with polygonal solder pads (convex centered polygons)
2019-01-27: 20.2.0.31: Panelisation: Turnover panels possible (right-left or top-bottom)
2019-01-23: 20.2.0.31: For torus, circle, disk, node and centering marks: Toogle between radius and diameter
2019-01-23: 20.2.0.31: Removed dark theme user interface (was experimental)
2019-01-23: 20.2.0.31: Button [Show error list again] left top is removed, if the project closes or if another project gets active
2019-01-23: 20.2.0.31: Black window background color: Cursor for drawing tracks gets white
2019-01-22: 20.2.0.31: Black window background color: The small black boxes for movements get white
2018-12-30: 20.2.0.22: Key [,] during track routing switches to the last recently used copper layers (type several times)
2018-12-18: 20.2.0.22: Direct connection to the component databases Ultra Librarian and SamacSys
2018-12-17: 20.2.0.20: DRC: "Track segment awry" depends on the length/width relation
2018-12-10: 20.2.0.16: Push&Shove: Reduced flickering and the wait cursor is not flashing up steadily
2018-12-07: 20.2.0.14: DRC: Check for spacing has been accelerated significantly
2018-12-07: 20.2.0.14: Sometimes the result of Push&Shove was not accepted
2018-12-04: 20.2.0.10: Push&Shove shows in the status bar below, if a collision is detected
2018-11-26: 19.8.0.94: TARGET 3001! V19 stands still, the current version is now V20
Kliknij aby rozwinąć...
 
C

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
44843
Reakcje/Polubienia
36916
TARGET 3001 20.6.0.49
What's new in TARGET 3001 20.6.0.49
Kliknij aby rozwinąć...
April 21, 2020
  • Projects with old ground planes cannot be changed and saved anew any more
  • V21 Preview: Signal classes can have special spacings among each other
  • Component import: Project variables are created, if they are referenced by texts with Funktion=Special

Kliknij aby rozwinąć...

Zaloguj lub Zarejestruj się aby zobaczyć!
 
C

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
44843
Reakcje/Polubienia
36916
TARGET 3001 20.6.0.49
What's new in TARGET 3001 20.6.0.49
Kliknij aby rozwinąć...
April 21, 2020
  • Projects with old ground planes cannot be changed and saved anew any more
  • V21 Preview: Signal classes can have special spacings among each other
  • Component import: Project variables are created, if they are referenced by texts with Funktion=Special
Kliknij aby rozwinąć...
Zaloguj lub Zarejestruj się aby zobaczyć!
 
C

Camel1965

Bardzo aktywny
Zasłużony
Dołączył
8 Wrzesień 2010
Posty
44843
Reakcje/Polubienia
36916
TARGET 3001 20.6.0.88
What's new in TARGET 3001 20.6.0.88
May 28, 2020
  • Small black boxes: Added "Extend segment" to the context menu
  • DXF import: improved ellipses
  • Selection assistant: added solder stop and solder paste
  • Added point "100%" in menu "View" and in the zoom palette
  • Tooltips also show the pin name (=function) for pins and pads, if it is available
  • TIFF output: Added height and width as input fields
  • "Reload component properties from the database": The property COMPONENT_VALUE becomes the new component value
  • Improved Eagle export
  • Text on a copper layer was shown in 3D view on the Z-height of the silk-screen

Kliknij aby rozwinąć...

Zaloguj lub Zarejestruj się aby zobaczyć!
 
Musisz się zalogować lub zarejestrować aby odpowiedzieć

Podobne tematy:

Grandalf
VokoscreenNG
Odpowiedzi
10
Wyświetleń
894
Ircus
Ircus
jasonX
MiniTool Partition Wizard Professional version 10.2.3 : A Review
Odpowiedzi
8
Wyświetleń
5K
jasonX
jasonX
Jarom
MaxLauncher
2
Odpowiedzi
19
Wyświetleń
2K
Camel1965
C
Jarom
MailEnable Standard
Odpowiedzi
4
Wyświetleń
1K
Camel1965
C
Jarom
CloneSpy
Odpowiedzi
3
Wyświetleń
1K
Grandalf
Grandalf
Do góry