cFosSpeed - wersje rozwojowe

[DziadDalf]

cFosSpeed 10.05 build 2202

+ If the virtual WiFi access point is configured to be started on Windows
startup it is now also started when the system is resumed (after sleep,
suspend, etc.).

- Kademlia protocol is now low, since it is usually used for BitTorrent
transfers nowadays.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.05 build 2203

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.05 build 2204

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.05 build 2205

x Fixed a bug which prevented use of UPnP services in many cases.

x cFosSpeed will now disconnect and reconnect if it finds itself connected
through a new router (i.e. the router MAC changed), even if the interface
(i.e. the network card) stayed the same. For example, this happens when
your laptop was sleeping and wakes up and connects to a new WLAN.

x Virtual Wi-Fi autostart sometimes failed when the network was not yet
available at start time. Virtual Wi-Fi autostart now waits for one minute
for the network to become available.

x Fixed a bluescreen when unloading.

x Fixed a memory leak and potential crash when unloading.

- Ignored even more junk speed values reported by modems and NICs.



cFosSpeed 10.05 build 2204

+ Added more SSDP variants to detect more UPnP capable routers.

+ Increased the number of possible secondary IPv6 addresses to 32.

+ IPv6 prefix lengths are now checked for range 1 - 128 and a default of 64
is used if the prefix length is out of range. Thanks to Walter E. for
inspiration.



cFosSpeed 10.05 build 2203

+ UPnP support can now be switched on and off in Preferences dialog.

+ Relaxed limiting of max rx/tx rates on basis of UPnP settings. Hopefully
this avoids problems with routers that return incorrect bandwidths.

x Fixed switching of medium on basis of UPnP discovered medium.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.07 build 2210

- Changed virtual Wi-Fi stop dialog.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.07 build 2212

+ UPnP traffic stats are now only determined for LAN connections.

x Re-worked UPnP device code to fix a crash and a memory leak.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2220

x Fixed RX data duplication issue with VMware. Set "spd gset filter_fix 1"
to disable.

x Fixed load problems under Windows 10 Technical Preview 10049.

- Sometimes a reinstall does not reinstall the driver (for reasons unknown).
The status window will now check that at least the version between driver
and daemon match. If not, a reboot should fix the problem.

- Switched char/wchar conversion from thread to system CP.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2221

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2222

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2223

+ Added automatic DNS cache refresh. Commonly used host names are now
refreshed, so they are always available if needed. This helps to speed up
web surfing and other activities when DNS servers or particular DNS
queries are slow. You can use the "spd gset store_dns_names 1" command to
activate this feature.

+ Fixed handling of UPnP URLs. Now more UPnP router info can be be handled
by cFosSpeed. Also added another workaround for the "1.3mbit" problem.

+ cFosSpeed driver is now started and stopped manually under Windows 10 if
the system doesn't do it itself. This should fix update problems people
were having.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2223

+ Added automatic DNS cache refresh. Commonly used host names are now
refreshed, so they are always available if needed. This helps to speed up
web surfing and other activities when DNS servers or particular DNS
queries are slow. You can use the "spd gset store_dns_names 1" command to
activate this feature.

+ Fixed handling of UPnP URLs. Now more UPnP router info can be be handled
by cFosSpeed. Also added another workaround for the "1.3mbit" problem.

+ cFosSpeed driver is now started and stopped manually under Windows 10 if
the system doesn't do it itself. This should fix update problems people
were having.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2226

+ DNS name refresh is now on by default. Added an option in the preferences
dialog to enable or disable it.

x Ignored more bogus UPnP rates.

- Added more trace output for configuration of ICS.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2228

- New Windows 10 builds return an error when uninstalling cFosSpeed. This bug
is recognized by Microsoft. In such a case, just uninstall a second time
and all in well.



cFosSpeed 10.09 build 2227

+ Uninstallation is now faster.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2228

+ The DNS cache refresh is now disabled when the DNSCACHE service is not
running. Thanks to Hirschgoulasch.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!

 

[DziadDalf]

cFosSpeed 10.09 build 2230

- Protocols IMAP4_C, NNTP_C, POP3_C and SSL_C_BULK are now by default set to
"Low" priority, since we count them as volume transfers.

Spoiler: pokaż

Zaloguj lub Zarejestruj się aby zobaczyć!